Epson WF-C20590 Installation Manual page 17

WF-C20590 Installation Guide
4. Remove the side plates of the packing box and the corner angles. Remove the
foam cushioning materials.
The power supply
cable is stored in
the foam packing
material.
Foam cushioning
materials
Side plate
Corner angle
Side plate
Foam cushioning
materials
PRELIMINARY
5. Remove the plastic bag covering the unit.
6. Using a box cutter, cut the transparent tape holding the four corners of the lower
box and open the box.
The protective material shown in the figure below is attached to
prevent injury and avoid deformation of the Entrance Guide Plate.
Make sure to remove it before connecting to the main unit.
Protective
material
Unpacking
Plastic bag
x4
Lower box
15