Epson WF-C20590 Installation Manual page 56

WF-C20590 Installation Guide
3. Open the E Door.
4. Attach the Front Lock Support Plate to the part covered with Cover 1.
5. Align the upper end of the Front Lock Support Plate with the bottom of the
marking line of the frame, then attach it with two screws.
Marking line
6. Attach the Back Lock Support Plate to the part covered with Cover 3, then attach it
with one screw.
Marking line
Front Lock Support Plate
Hook
Dowel
Back Lock Support Plate
Hook
PRELIMINARY
Installing the Optional Units
7. Attach the Switch Lever to the part covered with Cover 4, and attach it with one
screw.
8. Put the Drawer Rail on the Drawer Rail Guide, then temporarily attach them to the
printer.
Printer
Switch Lever
Screw
Drawer Rail
Drawer Rail Guide
54