Epson WF-C20590 Installation Manual page 10

WF-C20590 Installation Guide
8. Have one worker stand at the back of the printer to support it, and two workers
stand at each of the front corners of the printer.
9. While holding each front corner of the printer, the two workers should tilt the
printer back while the fourth worker removes the foam cushioning material and
the plastic sheet under the printer from the caster.
10. Gently lower the printer back down to the pallet.
Foam
cushioning
material
11. Place the wheel stoppers on each front caster.
Caster
Plastic sheet
PRELIMINARY
Unpacking
x2
Wheel
stoppers
To keep the printer from moving when unpacking, do the
following:
 Insert the wheel stoppers from the side to the advancing
direction of the caster.
 Make sure the wheel stoppers are completely secured.
8