Installing The Staple Cartridge (Finisher Unit) - Epson WF-C20590 Installation Manual

WF-C20590 Installation Guide

INSTALLING THE STAPLE CARTRIDGE (FINISHER UNIT)

1. Attach the Staple Cartridge to the Staple Unit.
Staple Unit
Staple
Cartridge
PRELIMINARY
Installing the Optional Units
After you install the Staple Cartridge, you must change the staple paper size setting.
2. On the printer, enter Service Support Mode (see
Left
[]LEFT______________________________[]UP_____________________________RIGHT[]
1. Maintenance: MENU
2. Individual Ac on Check: MENU
3. Before Repair Opera on: MENU
4. Adjustment - Main/Op on Unit: MENU
5. Adjustment - SCN/ADF: MENU
6. Ink Charge/ Discharge: MENU
7. Installa on: MENU
8. User Log Get Mode
9. USB Memory FW Update
10. Swap Mech Unit: MENU
[]BACK_____________________________[]DOWN___________________________RUN[]
Back
3. Select and enter the Installation Menu.
4. Select and enter Finisher Unit > Manual Staple Paper Size Setting.
5. Select ON for Letter Size.
6. Press BACK to return to the previous menus.
7. Press the Power Button to turn the printer off, then turn it back on again to activate
the setting.
) and follow steps 1 to 4.
Page 57
Up Right
Installation Menu
Run/OK (Enter)
Down
49