WF-C20590 Installation Guide
Finisher Unit left side
Cushion Sponge (305 mm)
Cushion Sponge (415 mm)
Make sure the Cushion
Sponges are aligned.
Installing the Optional Units
Installing the Finisher Unit
Be sure to check the following notes before the installation:
All workers must read the installation procedure together
before starting work.
Wear easy-to-move clothing, gloves, and safety shoes.
Work with care to avoid injuries.
Work with sufficient working space.
Never attempt to install the product alone.
Use proper lifting techniques, and stop working
immediately if you feel that the load is too bulky or heavy.
Minimum workers
1 person
Items needed
Phillips screwdriver
Flathead screwdriver
Joint parts (included in the Bridge Unit box)
PRELIMINARY
44