Epson WF-C20590 Installation Manual page 35

WF-C20590 Installation Guide
8. Place the hooks of the Bridge Unit Joint Stacker over the pins inside the paper
ejection slot of the EJ Unit.
9. Raise the stacker portion of the Bridge Unit Joint Stacker, and fix it with the two
screws (S11: ).
Pin
Bridge Unit Joint Stacker
Hook
Stacker portion
Pin
Stacker portion
Hook
No. Screw types
S11
C.B.SCREW, 3X8, F/ZN-3C
10. Attach the Small EJ Cover, Right removed in
11. Fit the EJ Unit into the printer.
12. Remove the cover on the bottom left side of the printer by releasing the hook with
a tool, such as a flathead screwdriver.
13. Attach the Joint to the printer with two screws (S16 : ).
Bottom left side
PRELIMINARY
Installing the Optional Units
Step 3 to the EJ unit.
Cover
Hook
Joint (for connecting
to the printer)
No.
S16 C.B.SCREW, 4X8, F/ZN-3C
Screw types
33