Epson WF-C20590 Installation Manual page 50

WF-C20590 Installation Guide
10. Push the Finisher Joint Fix Slider Lock back into the lock position, and attach it
with the screw that you removed in
If the Finisher Joint Fix Slider Lock can not be attached,
C H E C K
P O I N T press the Finisher Unit against the Bridge Unit from the left
side, and tightly close the Bridge Unit until the Finisher Joint
Fix Slider Lock can be attached.
Step 7.
Finisher
Joint Fix Slider Lock
No. Screw types
S16
C.B.SCREW, 4X8, F/ZN-3C
Installing the Optional Units
11. Install the Finisher Paper Ejection Tray and the Sub Tray.
Sub Tray
Finisher
Paper Ejection
Tray
PRELIMINARY
48