Cable Connection And Sponge Attachment; Bridge Unit Left Side; Power Supply Cable - Epson WF-C20590 Installation Manual

WF-C20590 Installation Guide

CABLE CONNECTION AND SPONGE ATTACHMENT

42. On the printer, remove the Small Cover located under the circuit breaker and the
Small Cover located on the right rear side. Connect the Power Supply Cable and
the Control Cable of the Bridge Unit to the printer.
Back
Small
Control Cable
Cover

Power Supply Cable

43. Remove the protective materials from the paper ejection slot on the Bridge Unit.

Bridge Unit left side

Small
Cover
44. Attach the Cushion Sponges to the left side of the Bridge Unit and the right side of
the Finisher Unit, aligning them with the guide lines as shown. The sponges are for
preventing foreign materials from entering into the unit.
Bridge Unit left side
Cushion Sponge (170 mm)
PRELIMINARY
Installing the Optional Units
Protective materials
Cushion Sponge (42.5 mm)
Cushion Sponge (375 mm)
Guide line
43