Epson WF-C20590 Installation Manual page 49

WF-C20590 Installation Guide
6. Open the front cover of the Finisher Unit.
7. Remove the screw (S16: ) for the Finisher Joint Fix Slider Lock.
8. Pull the Finisher Joint Fix Slider Lock toward the front to unlock it.
Finisher front
cover
Finisher Joint Fix
Slider Lock
No. Screw types
S16
C.B.SCREW, 4X8, F/ZN-3C
PRELIMINARY
Installing the Optional Units
9. Insert the Finisher Joint Drawer Plate Shaft into the hole on the Finisher Joint Fix
Slider Lock to connect the Finisher Unit to the Bridge Unit.
If the height of the Finisher Unit does not allow connection to the Bridge Unit, or
the casters of the Finisher Unit do not touch the ground after installation, you may
have to adjust the casters on the Finisher Unit (see
Finisher Joint Fix
Slider Lock hole
).
Page 50
Finisher Joint Drawer
Plate Shaft
47