Adjusting The Finisher Unit Height - Epson WF-C20590 Installation Manual
Hide thumbs
Also See for WF-C20590:
- User manual (403 pages) ,
- Basic manual (11 pages) ,
- Supplemental troubleshooting (32 pages)
Table of Contents
Advertisement
WF-C20590 Installation Guide
ADJUSTING THE FINISHER UNIT HEIGHT
You can adjust the height of the Finisher Unit by changing the height of its
casters, if necessary.
1.
Open the Front Cover of the Finisher Unit.
2.
Remove the screw in the Lower Front Cover, then open the cover.
Front
Cover
Lower Front
Cover
3.
Remove two screws in the Front Caster Cover.
4.
Slide the Front Caster Cover down, release the hooks, and remove the Front Caster
Cover.
Lower Front Cover
Remove
the screw
PRELIMINARY
Installing the Optional Units
Front Caster Cover
Screw
Screw
Hooks
50
Hide quick links:
Advertisement
Table of Contents
