Epson WF-C20590 Installation Manual page 40

WF-C20590 Installation Guide
23. Remove the screw (S1: ) that secures the Lock Lever.
Do not attempt to move the Lock Lever until after you have
C H E C K
P O I N T adjusted the height of the Bridge Unit. In the next step, adjust the
position of the Bridge Unit to secure the Joint Hooks and lock the
Bridge Unit.
Lock Lever
Lock Lever
No. Screw type
S1 C.B.S-TITE R, SCREW, 3X8, F/ZN-3C
Locked position
PRELIMINARY
Installing the Optional Units
24. Put your hand on the left side of the Bridge Unit, and lift the unit slightly until the
Lock Lever is positioned at the lock position.
When the Lock Lever is moved to the lock position, the lever
C H E C K
P O I N T stays at the center position even after you release your finger
from the lever.
25. Replace the screw (S1: ) to secure the Lock Lever.
Place your hand here
Lock Lever
(locked position)
No. Screw type
S1 C.B.S-TITE R, SCREW, 3X8, F/ZN-3C
38