Scope; Warnings, Cautions, Instructions And Notes - AGFA DX-G User Manual

Scope

This manual contains information for safe and effective operation of the
TM
DX-G /DX-M
Warnings, Cautions, Instructions and
Notes
The following samples illustrate how warnings, cautions, instructions and
notes appear in this document. The text explains their intended use.
The purpose of safety icons is to indicate at a glance the type of caution,
warning or danger.
Caution:
cause damage to the equipment described in this manual or any other
equipment or goods and can cause environmental pollution.
Instruction: This sign is used typically in combination with the warning
sign when providing a specific instruction, which if followed exactly,
should avoid the subject of the warning.
Note: Notes provide advice and highlight unusual points. A note is not
intended as an instruction.
2321 E EN 20130722
TM
digitizers.
WARNING: Warnings are directions which, if they are not followed,
can cause fatal or serious injuries to a user, engineer, patient or any
other person or can lead to a mistreatment.
Cautions are directions which, if they are not followed, can
DX-G/DX-M
9