General - AGFA DX-G User Manual

General

Always take into account the markings and labels provided on the inside and
outside of the machine. A brief overview of these markings and labels and
their meaning is given below.
2321 E EN 20130722
Safety warning, indicating that the DX-G/DX-M manuals
should be consulted before making any connections to
other equipment. The use of accessory equipment not
complying with the equivalent safety requirements of this
digitizer may lead to a reduced level of safety of the result-
ing system. Consideration relating to the choice of acces-
sory equipment shall include:
•
Use of the accessory equipment in the patient vicinity,
•
Evidence that the safety certification of the accessory
equipment has been performed in accordance with
respective IEC standards (e.g. IEC 60950 for data pro-
cessing equipment or IEC 60601-1 for medical equip-
ment).
In addition all configurations must comply with the
requirements for medical electrical systems according to
IEC 60601-1. The party that makes the connections acts as
system configurator and is responsible for complying with
the systems standard.
If required contact your local service organization.
In order to reduce the risk of electric shock, do not remove
any covers.
Caution hot:
Keep hands clear from the erasure unit.
Supplementary protective earth connector:
Provides a connection between the digitizer and the
potential equalization busbar of the electrical system as
found in medical environments. This plug should never be
unplugged before the power is turned off and the power
plug has been removed.
It is recommended to use the supplementary protective
earth connection as additional safety measure.
DX-G/DX-M
27