Status Indicator: Flashing Red - AGFA DX-G User Manual

DX-G/DX-M

Status Indicator: flashing red

If the status indicator is flashing red, your digitizer deals with an error that
can be remedied by the operator. Always follow the instructions that appear
on the touch panel.
For example; if you wrongly insert the cassette, with the exposed and
identified image plate, in the input buffer, the following instructions will
appear on the touch panel:
Proceed as follows:
1 Put the cassettes with the exposed and identified image plates wrongly in the
input buffer on the left side of the digitizer.
2 As a result, the digitizer moves the cassette into the intermediate position and
the following error message appears.
Figure 6: Example remediable error (status indicator flashing red)
3 Click the Confirm button.
4 Remove the cassette from the output buffer.
Now you can re-enter the cassette correctly.
72
2321 E EN 20130722