General Safety Instructions - AGFA DX-G User Manual

DX-G/DX-M

General Safety Instructions

Make sure that the digitizer is constantly monitored in order to avoid inappro-

priate handling, especially by children.
Only service personnel with certified Agfa training must make repairs. Only

authorized service personnel must make changes to the digitizer.
If there is any visible damage to the machine casing, do not start nor use the

digitizer.
Do not override or disconnect the integrated safety features.

Do not apply excessive shock or vibration to the digitizer during operation. This

may decrease the image quality. Neither should the device be moved during
operation.
Switch off the digitizer before performing any maintenance work or repairs.

Disconnect the digitizer from the mains before making repairs or performing
any maintenance activities during which live electrical components may be
exposed.
As is the case for all technical devices, the digitizer must be operated, cared for

and serviced correctly.
If you do not operate the digitizer correctly or if you do not have it serviced cor-

rectly, Agfa is not liable for resulting disturbances, damages or injuries.
If you notice conspicuous noise or smoke, disconnect the digitizer immediately.

Do not pour water or any other liquid over the device.

44
Note: To avoid images being lost due to a power failure, the workstation
and the digitizer can be connected to an uninterruptible power supply
(UPS) or an institutional standby generator.
Note: The DX-M only supports one type of mammography plates and cassettes
at a time. It has to be decided to use either CR HM5.x or CR MM3.xR.
2321 E EN 20130722