Table of Contents
Advertisement
Configuration
The digitizer is part of a CR system that has the following configuration:
• The digitizer, a digitizer for scan of image plates retaining latent X-ray
images. The digitizer accepts multiple cassettes at a time, to be scanned
sequentially.
• The NX workstation, one or more CR workstations with ID Tablet for cassette
identification, image processing and image transmission of digitized images
received from the digitizer.
• Cassette and plate system: CR HD5.x General, CR HD5.x FLFS, CR HD5.x
AEC, CR MD4.xR General and CR MD4.xR FLFS.
• For DX-M additionally, CR HM5.x Mammo or CR MM3.xR Mammo - mixed
use of both types in one digitizer will not be supported.
• The CR HD5.x General detector, CR HD5.x FLFS detector, CR HD5.x AEC
detector, CR MD4.xR General plate and cassette, CR MD4.xR FLFS plate and
cassette, CR HM5.x Mammo detector and CR MM3.xR Mammo plate and cas-
sette are generically referred to as 'plates and cassettes'.
Note: For US DX-M is released in combination with CR HM5.x Mammo
detectors only.
System Documentation
The documentation consists of following items:
• DX-G and DX-M User Manual.
• DX-G and DX-M Workflow Sheets.
• AGFA CR Detectors, Plates and Cassettes (CR HD5.x, CR MD4.xR, CR HM5.x,
CR MM3.xR) User Manual.
• CR Full Leg Full Spine User Manual (4408).
• NX User Manual (4420).
• CR Mammography System User Manual (2344).
The documentation shall be kept with the system for easy reference. Technical
documentation is available in the product service documentation which is
available from your local support organization.
2321 E EN 20130722
DX-G/DX-M
13
Hide quick links:
Advertisement
Table of Contents
