Operation Section (With Regard To The Panel); Preface - JUKI AMS-221F-2516 Instruction Manual

II. OPERATION SECTION (WITH REGARD TO THE PANEL)

1. PREFACE

* Service patterns are contained in the main body of sewing machine
φ60 Pitch 3mm
VD00102.VDT
1) Kind of sewing data handled with IP-500
Pattern name
Users' pattern
Vector format data
M3 data
Sewing standard format
2) Using the data (Vector format data) of AMS-E/EN series with AMS-221F
The vector form data is interchangeable. Copy data from the AMS-EN/IP-420 by means of the USB
storage device.
Refer to "II-2-7. Using communication function" p.69
221F/IP-500.
3) Using the data (M3 data) of AMS-D series with AMS-221F.
There are two ways to use M3 data with AMS-221F.
① Reading by using IP-500
Use PC (personal computer) and copy file (¥AMS¥AMS00×××.M3) of M3 from floppy disk of
AMS-D to ¥AMS of media. Insert the media to IP-500, and select Pattern No.××× from M3 data.
② Changing to vector format data using PM-1
Change to the vector format data with PM-1. (For the details, refer to Help of PM-1.) Copy the
changed vector format data to ¥VDATA folder of the media.
Insert the media to IP-500 and select File No.
Pattern that can be stored in the body.
Max. 999 patterns can be registered.
File that extension is ".VDT"
Read from media. Max. 999 patterns can be used.
Pattern data of AMS-D series
Used by copying from floppy disk of AMS-D series to media. Max. 999 patterns can be
used.
File that extension is ".DAT"
Read from media. Max. 999 patterns can be used.
Description
for how to write the data to the AMS-
– 21 –