JUKI AMS-221F-2516 Instruction Manual page 69

L
J
④ Setting the current value of counter
When CURRENT VALUE SETTING button
pressed, the counter current value input screen is displayed.
Enter the current value with numeric keypad
+ / - button
to confirm.
K
2) "Count complete" error resetting procedure
If the "count complete" condition is reached, the "count com-
plete" error screen will be displayed.
Reset the current value on the counter by pressing CLEAR
M. Then, the screen returns to the sewing screen.
button
M
In the case the close time has been set with the memory
switch "U145: Count completion closing time", CLEAR button
M will not be displayed.
In the case the close time has been set with the memory
switch "U145: Count completion closing time", CLEAR button
– 66 –
J. Then, press ENTER button
F is
L,
to
K