Buttons To Be Used In Common; Basic Operation Of Ip-500 - JUKI AMS-221F-2516 Instruction Manual

2-2. Buttons to be used in common

The buttons which perform common operations in each screen of IP-500 are as follows :
CANCEL button
ENTER button
UP SCROLL button
DOWN SCROLL
button
RESET button
INTERMEDIATE
PRESSER SETTING
button
BOBBIN WINDER
button

2-3. Basic operation of IP-500

A
This button is used for closing the screen.
→
In the case this button is pressed when the parameter setting
screen is displayed, the data being changed is cancelled.
This button is used for confirming the changed data and
→
closing the screen.
→ This button is used for scrolling up the display.
→ This button is used for scrolling down the display.
→ This button performs the release of error.
Presser is lowered, and the presser lowering screen is
→
displayed. To lift presser, press presser lift button displayed in
the presser lowering screen.
Bobbin thread winding is performed.
→
Refer to "II-2-4-10. Winding bobbin thread"
① Turn ON the power switch
When the power to the sewing machine is turned ON for the
first time after delivery, the language selection screen is dis-
played.
Select the language you want to use. (The language you se-
lect on this screen can be changed afterward with the memory
switch U500.)
If the language is left unselected, the language selec-
tion screen will be displayed again next time the pow-
er is turned ON.
– 26 –
p.45.