Optional; Table Of Needle Hole Guide; Silicon Oil Tank - JUKI AMS-221F-2516 Instruction Manual

2. OPTIONAL

2-1. Table of Needle hole guide

Needle used
Size
#09 to #11 40207153
#11 to #14 *1 40196061
#14 to #18 *2 40196067
40196071
#18 to #21
40196074
#22 to #25 *3 40207754
#18 to #25 40213021
Needle used
Size
#09 to #11
B1601210D0E (OP)
#11 to #14 * 40023632 (Standard)
1
B1601210D0FA (OP)
#14 to #18 *
2
#18 to #21 B1601210D0BA (G type)
#22 to #25 *
3
B1601210D0CA (OP)
#18 to #25
* : S type installed needle (DP × 5 #14)
1
* : H type installed needle (DP × 17 #18)
2
* : G type installed needle (DP × 17 #23)
3
・ S type : Applicable count of thread : #80 to #20
・ H type : Applicable count of thread : #50 to #02
・ G type : Applicable count of thread : #20 to #02
・ (OP) means the optional.

2-2. Silicon oil tank

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
❷
❸
❶
❹
If the thread twists hard on silicon oil
tank base ❻ (40096982), reverse the
direction of winding the thread.
Part No. Needle hole diameter
ø 1.6
ø 1.6
ø 2.0
ø 2.4
ø 3.0
ø 3.0 (with a
counterbore)
ø 3.0 (eccentric hole)
Intermediate presser
Part No.
❺
❻
Needle hole guide
For knits (OP)
For light-weight to medium-weight materials (S type)
For medium-weight to heavy-weight materials (H
type)
For heavy-weight materials (OP)
For heavy-weight materials (G type)
For extra heavy-weight materials (OP) (Supplied
with G type models)
For heavy-weight materials to prevent skip-stitching
(OP)
Size (øA × øB × H × L)
ø 1.6 × ø 2.6 × 5.7 × 37.0
ø 2.2 × ø 3.6 × 5.7 × 38.5
ø 2.2 × ø 3.6 × 8.7 × 41.5
ø 2.7 × ø 4.1 × 5.7 × 38.5
ø 3.5 × ø 5.5 × 5.7 × 38.5
The G type model is provided with silicon oil tank
asm. (40097301) as an accessory. (For the types
of models other than G type, this device can also
be retrofitted as an option.)
The silicon oil tank asm. should be fixed on the
sewing machine by means of setscrews ❶ (SM-
4041055SP) and ❷ (SM4042055SP) supplied with
the unit. To tighten setscrew ❷, tighten it together
with thread guide collar ❸ (11315108), silicon oil
tank thread guide ❹ (40010414) and thread guide
setscrew washer ❺ (WP0501046SC). Silicon oil
tank thread guide ❹ (40010414) should be placed
so that it is in parallel with silicon oil tank base ❻
(40096982).
– 104 –
Application
øA
H
øB
L