Operation Section (With Regard To The Panel); Preface - JUKI AMS-224EN/IP-420 Instruction Manual

@. oPEratIoN SEctIoN (WItH rEGarD to tHE PaNEL)

1. PrEFacE

The meda suppled wth the unt contans the followng servce patterns.
The operaton panel for the AMS-224EN comes n the followng three types.
H Type, G Type
Knd
(Vnyl leather)
Area
ø 60 Ptch 3.6mm
Pattern No. 0
4530
6030
1) Kind of sewing data handled with IP-420
Sewng data that each panel handles are as shown below.
Pattern name
Users' pattern
Vector format data
M3 data
Sewng standard
format
2) using the data (M3 data) of aMS-210D series with aMS-224EN
There are two ways to use M3 data wth AMS-224EN.
1 reading by using IP-420
Use PC (personal computer) and copy file (¥AMS¥AMS00xxx.M3) of M3 from floppy disk of AMS-
210D to ¥AMS of media. Insert the media to IP-420, and select Pattern No.xxx from M3 data.
2 changing to vector format data using PM-1
Change to the vector format data wth PM-. (For the detals, refer to Help of PM-.)
Copy the changed vector format data to ¥VDATA folder of the media.
Insert the meda to IP-420 and select Pattern No.
H Type, G Type
(Denm)
ø 60 Ptch 3 mm
Pattern No. 02
Description
Pattern that can be stored n the body.
Max. 999 patterns can be regstered.
Fle that extenson s ".VDT"
Read from meda. Max. 999 patterns can be used.
Pattern data of AMS-20D seres
Used by copying from floppy disk of AMS-210D series to media.
Max. 999 patterns can be used.
Fle that extenson s ".DAT"
Read from meda. Max. 999 patterns can be used.
H Type, G Type
ø 60 Ptch 2.5 mm
Pattern No. 03
– 5 –