Performing Communication By Using Usb; How To Load Data - JUKI AMS-221F-2516 Instruction Manual

2-7-3. Performing communication by using USB

2-7-4. How to load data

B
F
E
A
Data can be sent/received to/from a personal
computer or the like, by means of a USB cable.
* The following explanation is described taking the case of file-
name management as an example.
① Display the communication screen
When communication switch
D
pressed in the data input screen, the communication screen is
displayed.
② Select the communication procedure
There are two communication procedures as described below.
B Writing data from media to panel
C
D Writing data from panel to media
Select the communication means you want to use.
③ Selecting the data file
When F is pressed, the write file selection screen is dis-
played.
Select the file name of the data you want to write.
G
It is possible to select two or more files. (Refer to the next
H
page for details.)
The file being selected can be unselected by pressing the file
name again.
In the case one file is selected, the following function can be
used.
I
When CODE LIST button
the selected file is displayed.
When DELETE button
deleted.
④ Confirming the data file
When ENTER button
screen is closed to complete the file selection.
– 70 –
If the contact part becomes dirty,
failure of contact will be caused. Do
not touch by hand, and control so
that dust, oil or other foreign material
does not adhere to it. In addition, the
inside element is damaged by stat-
ic electricity or the like. So, be very
careful when handling.
A of switch seat section is
G is pressed, the preview of
H is pressed, the selected file is
I is pressed, the data file selection