Replacing The Fuse - JUKI AMS-221F-2516 Instruction Manual

1-13. Replacing the fuse

DANGER :
1. To avoid electrical shock hazards, turn OFF the power and open the control box cover after about
five minutes have passed.
2. Open the control box cover after turning OFF the power without fail. Then, replace with a new fuse
with the specified capacity.
❶
The machine uses the following four fuses :
❶ Fuse for 24 V control power protection
5A (time-lag fuse)
❷ Fuse for 85 V stepping motor power pro-
tection
5A (time-lag fuse)
❸ Fuse for 200 V stepping motor power
protection
5A (time-lag fuse)
❹ Fuse for 33 V solenoid power protection
5A (time-lag fuse)
❸
❹
❷
– 98 –