JUKI AMS-221F-2516 Instruction Manual page 78

Error
Description of error
code
Grease-up warning
E220
At the time of operation of 100
million stitches
→ Refer to
"III-1-10.
Replenishing the designated
places with grease"
E221 Grease-up error
At the time of operation of 120
million stitches
The sewing machine is put in
the sewing-impossible status.
It is possible to clear with
memoryswitch U245 .
→ Refer to
"III-1-10.
Replenishing the designated
places with grease"
E302 Head tilt confirmation
When head tilt sensor is OFF.
External input command time
E307
out error
Input is not performed for a fixed
period of time with the external
input command of vector data.
E308 Time-out error of wait terminal
There is no input to wait terminal
for a certain period of time.
E406 Password mismatch error
E703 Panel is connected to the
sewing machine which is not
supposed. (Machine type error)
When the machine type code of
system is not proper in the initial
communication.
Inconsistency of system
E704
version
System software version
is inconsistent in the initial
communication.
E731 Main motor hole sensor is
defective or position sensor is
defective.
Hole sensor or position sensor
of the sewing machine motor is
defective.
E733 Reverse rotation of main shaft
motor
When sewing machine motor
rotates in reverse direction.
Display message
p.92.
p.92.
– 75 –
Place of
How to recover
recovery
Possible to re- Data input
start after reset. screen
Possible to re- Data input
start after reset. screen
Possible to re- Previous
start after reset. screen
Possible to re- Data input
start after reset. screen
Turn OFF the
power
Possible to re- Password
start after reset. input
screen
Possible to rewrite Communi-
program after cation
pressing down screen
communication
switch.
Possible to rewrite Communi-
program after cation
pressing down screen
communication
switch.
Turn OFF the
power
Turn OFF the
power