JUKI AMS-221F-2516 Instruction Manual page 41

E
F
③ Editing the thread tension
Lower the feeding frame. Proceed stitching.
When SETTING button
increase/decrease value input screen is displayed.
Enter a desired value on this screen with numeric keypad
E and +/- button
to
When ENTER button
G
increase/decrease value command is inserted to the current
needle position and the data is confirmed.
④ Deleting the command
In the case there is a thread tension increase/decrease value
command at the needle entry point when proceeding stitching,
COMMAND DELETE button
command displayed in (A) is deleted by pressing COMMAND
DELETE button
on the confirmation screen.
⑤ Finishing editing of the thread tension
When FEEDING FRAME INITIAL POSITION button
L
pressed, the feeding frame travels to the sewing start position
and goes up. Then, the screen returns to the sewing screen.
– 38 –
D is pressed, the thread tension
F.
G is pressed, the thread tension
H will be displayed. The
H and pressing ENTER button L
L is