When Performing Winding Bobbin Thread Only - JUKI AMS-221F-2516 Instruction Manual

(2) When performing winding bobbin thread only

C
① Display the bobbin winding screen
A
When BOBBIN WINDER button
pattern setting screen, the feeding frame comes down. Then,
the bobbin winding screen is displayed.
② Start bobbin winding
Depress the start pedal, and the sewing machine rotates and
starts winding bobbin thread.
③ Stop the sewing machine
When CLOSE button
stops. Then, the screen returns to the pattern setting screen.
When the start pedal is depressed again during winding of
the bobbin, the sewing machine stops while remaining in the
B
bobbin winding mode.
When the start pedal is depressed again, the sewing machine
re-starts winding of the bobbin. Use this function when you
want to wind two or more bobbins.
The sewing machine cannot be placed in the bobbin
winding mode immediately after turning the power
ON.
Select a pattern once. Then, press READY button
sewing machine can be placed in the bobbin winding
mode.
– 46 –
B is pressed, the sewing machine
C to display the sewing screen. In this state, the
A is pressed on the