1-11. Draining waste oil
1-12. Amount of oil supplied to the hook
❹
❸
❷
❶
When polyethylene oiler ❶ becomes filled with oil,
remove polyethylene oiler ❶ and drain the oil.
❶
Loosen setscrew ❶ and remove setscrew ❶ .
1)
When screwing in adjustment screw ❷ , the
2)
amount of oil of oil pipe, left ❹ can be re-
duced.
After the adjustment, screw in setscrew ❶
3)
and fix it.
– 97 –
1. The state of standard delivery is
the position where ❸ is lightly
screwed in and returned by 4 turns.
2. When reducing the amount of oil,
do not screw in the screw at once.
Observe the state for approximate-
ly half a day at the position where
❸ is screwed in and returned by
2 turns. If reducing is excessive,
worn-out of the hook will result.