Table of Contents
Advertisement
2-4-11. How to edit characters
Characters used in the file name and comment information of the sewing data stored in the sewing ma-
chine can be edited.
A
D
E
2) Restriction on input of edit of characters
The following restrictions are applied to editing of character strings.
*
In the file name, the case is ignored.
*
In the case of reading the sewing data from the USB thumb drive, the files that are not relevant to
the restriction on input are not displayed in the pattern list.
File name (alphanumeric characters)
Comment (alphanumeric characters
and symbols)
1) Basic operation
① Displaying the character edit screen
When CHARACTER EDIT button
pressed on the pattern setting screen, the character edit
screen is displayed.
Vector data on the file name and comment informa-
tion registered in cycle patterns cannot be edited.
When CHARACTER EDIT button
is pressed, the disable buzzer sounds and the char-
acter editing operation is rejected.
② Selecting the character string to edit and carrying out
editing of characters
Press any point in the frame corresponding to the file name D
C
or comment information E you want to edit.
③ Confirming the edited character string
When ENTER button
string is confirmed. Then, the screen returns to the previous
screen.
④ Cancelling the edited character string
B
When CLOSE button
string is discarded. Then, the screen returns to the previous
screen.
User pattern
12 characters + (.VDT)
255 characters
– 47 –
B is pressed, the edited character
C is pressed, the edited character
Cycle pattern
12 characters + (.CSD)
14 characters
A is
A
Hide quick links:
Advertisement
Table of Contents
