JUKI AMS-221F-2516 Instruction Manual page 57

C
② Creating a new file
Enter the file name of a new cycle pattern you want to create.
→ Refer to
"II-2-4-11. How to edit characters"
When ENTER button
ting screen is displayed.
B
③ Registering the pattern in a step
When PATTERN SELECTION button
is pressed, the pattern selection screen is displayed.
Select the pattern you want to register, and press ENTER
D to register it.
④ Repeating the step ③ by the number of steps to be reg-
istered
When the registration of the 1st step is completed, PATTERN
SELECTION button for the 2nd step is displayed.
Repeat the step ③ by the number of steps you want to regis-
ter.
D
– 54 –
p.47.
B is pressed, the cycle pattern set-
C