Setting Of The Skip Of Sewing Data - JUKI AMS-221F-2516 Instruction Manual

2-4-12. Setting of the skip of sewing data

"Sew/not sew" can be set to the pattern consisting of two or more elements that are divided with thread
trimming. In the case that two or more materials are used for sewing one piece of pattern data but a part
of materials lacks, use this function to sew the lacked material.
A
B
C
This function can be set to "enable/disable" with the
memory switch "U407: Enable/disable of sewing data
skip setting button". When the function is enabled,
SEWING DATA Botón de AJUSTE DE SALTOS
A is displayed on the setting screen/sewing screen.
1) Basic operation
① Displaying the sewing data skip setting screen
Set the memory switch "U407" to "enable". Press SEWING
DATA Botón de AJUSTE DE SALTOS
screen/sewing screen to display the sewing data skip setting
screen.
② Selecting an element
Move the relevant element by pressing ELEMENT FORWARD
B
button
D
③ Selecting "sew/not sew"
When SKIP CHANGEOVER button
not sew" of the selected element can be selected
: Sew
: Not sew
– 48 –
or ELEMENT BACKWARD button
A on the setting
C
.
D is pressed, "sew/