Replenishing The Designated Places With Grease - JUKI AMS-221F-2516 Instruction Manual

1-10. Replenishing the designated places with grease

* Perform grease supplement when the errors below are displayed or once a year (either
one which is earlier).
If grease has decreased due to cleaning of the sewing machine or any other reasons, be
sure to immediately add grease.
D
When the sewing machine has been used for a certain number
of stitches, error "E220 Grease-up warning" is displayed. This
display informs the operator of the time of replenishing the
designated places with grease. Be sure to replenish the places
with the grease below. Then call the memory switch U245 ,
press CLEAR button
ES D to "0".
Even after the display of the error "E220 Grease-up warning",
B
when RESET key
and the sewing machine can be continuously used. Afterwards,
however, error code "E220 Grease-up warning" is displayed
every time the power is re-turning ON.
In addition, when the sewing machine is used further for a
certain period of time without replenishing the places with
grease after the display of error No. E220, error "E221 Grease-
up error" is displayed and the sewing machine fails to operate
since the error cannot be released even when the RESET key
is pressed.
When error "E221 Grease-up error" is displayed, be sure to
replenish the designated places below with grease. Then call
B
the memory switch U245 , press CLEAR button
set NUMBER OF STITCHES D "0".
When RESET key
designated places with grease, error code "E221 Grease-up
warning" is displayed every time the power is re-turning ON af-
terwards and the sewing machine fails to operate. So, be careful.
1. Error code E220 or E221 is displayed again
A
unless UMBER OF STITCHES D is changed to
"0" after replenishing the designated places
C
with grease.
When E221 is displayed, the sewing machine
fails to operate. So, be careful.
2. When GREASE APPLYING POSITION DISPLAY
button
grease applying position can be confirmed in
the panel display. Be sure, however, to perform
the grease applying after turning OFF the pow-
er.
– 92 –
A and set NUMBER OF STITCH-
B is pressed, the error is released,
B is pressed without replenishing the
C is pressed in each screen, the
A and