4-2. Attaching the needle
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
❶
1.5 mm
❷
4-3. Threading the machine head
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Loosen setscrew ❶ and hold needle ❷ with the long
groove facing toward you. Then fully insert it into the
hole in the needle bar, and tighten setscrew ❶ .
When tightening setscrew ❶ , be
sure to use the screwdriver (Part No.
: 40032763) supplied as accessories.
Do not use L-shaped hexagon wrench
key. There is a danger of breaking
setscrew ❶ .
– 12 –