Operation Section (With Regard To The Panel); Preface - JUKI AP-874/IP-420 Instruction Manual

II. OPERATION SECTION (WITH REGARD TO THE PANEL)

1. PREFACE

1) Kind of sewing data handled with IP-420
Pattern name
Users' pattern
Vector format data
2) To use the sewing data (M3 data) used by the AVP-875 for the AP-874, it is necessary to con-
vert the data into vector format data by means of the PM-1.
Change to the vector format data with PM-1. (For the details, refer to Help of PM-1.)
Copy the changed vector format data to ¥VDATA folder of the media.
Insert the media to IP-420 and select Pattern No.
3) Folder structure of the media
Store each file in the directories below of the media.
Media drive
Data that are not stored in the directories above cannot be read. So, be careful.
Pattern that can be stored in the body.
Max. 999 patterns can be registered.
File that extension is ".VDT"
Read from media. Max. 999 patterns can be used.
VDATA
Store vector format data.
Description
VD00
VD00
– 24 –
. VDT
Vector format data :
Store in ¥VDATA.
. VDT