JUKI AMS-221F-2516 Instruction Manual page 42

2) How to edit the intermediate presser height
R
S
A
L
M
N
O
K ① Displaying the pattern shape confirmation screen
Press PATTERN SHAPE CONFIRMATION button
the sewing screen to display the pattern shape confirmation
screen. When INTERMEDIATE PRESER HEIGHT SETTING
button
and lowered.
Q
② Changing over to the intermediate presser mode
Select the intermediate presser mode with RADIO button
L.
The absolute value (reference value of the intermediate
presser height + increase/decrease value) of the intermediate
presser height is displayed on intermediate presser height M.
③ Editing the intermediate presser height
Lower the feeding frame. Proceed stitching.
When SETTING button
presser height increase/decrease value input screen is dis-
played.
Enter a desired value on this screen with numeric keypad
to
When ENTER button
P
presser height increase/decrease value command is inserted
to the current needle position and the data is confirmed.
④ Deleting the command
In the case there is a thread tension increase/decrease value
command at the needle entry point when proceeding stitching,
COMMAND DELETE button
command displayed in (A) is deleted by pressing COMMAND
DELETE button
on the confirmation screen.
⑤ Finishing editing of the intermediate presser height
When FEEDING FRAME INITIAL POSITION button
T
pressed, the feeding frame travels to the sewing start position.
Then, the screen returns to the sewing screen.
K is pressed, the intermediate presser is lifted
M is pressed, the intermediate
N and +/- button
P is pressed, the intermediate
Q and pressing ENTER button
– 39 –
A on
O.
Q will be displayed. The
T
R is