Remote Operations - Sharp FO-90 Operation Manual

Remote Operations

You can call the FO-90 from any tone dial telephone and play back
your messages using the remote commands. You can also use these
commands to change the reception mode and other settings.
Remote code number
To perform remote operations, you must first program a remote code
number. This number is used to prevent unauthorised people from
listening to your messages or changing the settings of your machine.
The remote code number has been set to "001" at the factory. If you
want to change it, press the panel keys as shown below.
1
Press these keys:
The display will show:
A.M. SETTINGS
2
Press these keys:
The display will show:
REMOTE CODE
3
Enter a 3-digit number by pressing
the number keys.
4
Press the START/MEMORY key
and then the STOP key.
Remote Operations
FUNCTION
0
2 2
START/
MEMORY
2
(Example)
STOP
49