Esc+Wd Copy Within Labels (Part Copy) - SATO LC400e Series Programming Reference Manual

7.13 Modificaiton
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se
7.13 ESC+WD Copy within Labels (Part
Copy within Labels (Part Copy)
Copy)
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To copy the specified range from an optional location to another optional location
[Format]
<WD>VaaaaHbbbbYccccXdddd
● Parameter
a {Vertical Start Point of Copy Source}
b {Horizontal Start Point of Copy Source}
c {Vertical Dot Size of Copy Source}
d {Horizontal Dot Size of Copy Source}
[Coding Example] Vertical Start Point of Copy Source:50, Horizontal Start Point of Copy Source:50,
Vertical Dot Size of Copy Source:200, Horizontal Dot Size of Copy Source:400
<A>
<V>50<H>50<P>2<L>0202<XU>ABCD
<V>300<H>100<WD>V50H50Y200X400
<Q>2
<Z>
cccc
Dot line portion shows the copy area.
Actual print portion is 「ABCD」.
[Supplementary Explanation]
1. Specify location for copy destination, specify Print Vertical Position Specification <V> and Print Horizontal Position Specification
<H> before the Copy Specification <WD> inside of the label.
2. Do not specify the position of copy destination within the copy source.
3. If print start position of copy area exceed printable area, it will become command error and stop printing.
M-8400RVe CL608e/612e
M-84Pro-2/3/6
WD
<57> <44>
16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
=
=
=
=
dddd
aaaa
bbbb
Ａ Ｂ Ｃ Ｄ
Ａ Ｂ Ｃ Ｄ
M-5900RVe M-10e
LC408e/412e
ESC+WD
Parameter
VaaaaHbbbbYccccXdddd
valid range : refer to next page table
valid range : refer to next page table
valid range : refer to next page table
valid range : refer to next page table
34