Print Position Command; Esc+H Print Horizontal Position - SATO LC400e Series Programming Reference Manual

6. Print Position Command

6.1 Print Position
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

6.1 ESC+H Print Horizontal Position

Print Horizontal Position
ESC
HEX Code
<1B>
16
Default Value aaaa=1
Valid Range and
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify the horizontal direction print position from the print start position by dot
[Format]
<H>aaaa
●Parameter
a {Print Horizontal Position Specification}
[Coding Example] Print Horizontal Position:200 dot
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.To specify the start horizontal position for character, barcode, borders, graphic etc.
[Point]
1.Content (character, barcode, graphic etc) exceeds print valid range will not be printed.
[Parameter Default Value and Valid Range]
Model Default
Value
LC408e 1
CL408e 1
M-8400RVe 1
CL608e 1
M-5900RVe 1
M-8485Se 1
M-8460Se 1
M-8459Se 1
M-84Pro-2 1
[Valid Command]
Modify <WD>
<XU>
Font
<RD>
<k8>
*1
Barcode
<B>
<BK>
*2
2-D Code
<2D10>
*3
Graphic <G>
Memory Card
<GR>
*1 Requires optional Kanji ROM. (Not supported for LC408e/412e.)
*2 Not supported for LC408e/412e.
*3 Supported for LC408e/412e only.
M-8400RVe CL608e/612e
M-84Pro-2/3/6
H
<48>
16
The set parameter is not maintained
The set parameter is valid until the next parameter is made
The set parameter becomes default value at next item <A>
Valid Range (dot) Model
1～832 LC412e
1～832 CL412e
1～832 CL612e
1～1216
1～896 M-8490Se
1～1024 M-84Pro-3
1～1216 M-84Pro-6
1～896
1～832
<FW> <(> <RF>
<XS> <XM> <XB>
<$=>
<K1> *1 <K2> *1
<k9>
*1
<BC> <BG> <BI>
<BQ> <BV> <BX>
*2 *2 *2
<2D12> <2D20> <2D30>
*3 *3
<GM> <GP>
<GC> <PY>
M-5900RVe M-10e
LC408e/412e
Parameter
aaaa
= Valid Range: refer to the table below
Default
Value
<XL>
<K8> *1 <K9>
<BP> <D> <D><d>
<2D31> <2D32> <2D50>
*3 *3 *3
20
ESC+H
Valid Range (dot)
1 1～1248
1 1～1248
1 1～1984
1 1～1344
1 1～1248
1 1～2496
<OA>
*1 <k1> *1 <k2> *1
<BD> <BT>
<2D51>
*3 *3
<OB>
<BW>