Esc+Rm Mirror Rotate - SATO LC400e Series Programming Reference Manual

7.16 Modification
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

7.16 ESC+RM Mirror Rotate

Mirror Rotate
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
Mirror rotate the print data
[Format]
<H>hhhh<V>vvvv<RM>aaaa,bbbb
● Parameter
h {Mirror Rotate Specification Start Horizontal Position}
v {Mirror Rotate Specification Start Horizontal Position}
a {Mirror Rotate Specification Horizontal Range}
b {Mirror Rotate Specification Vertical Range}
[Coding Example 1] When Mirror Rotate Range is specified
<A>
<H>100<V>100<XM>12345
<H>100<V>100<RM>0200,0080
<Q>1
<Z>
[Coding Example 2] When Mirror Rotate Specification is not specified
<A>
<H>100<V>100<XM>12345
<RM>
<Q>1
<Z>
[Supplementary Explanation]
1. When parameter of aaaa, bbbb is not specified, all specified print data before Mirror Rotate Specification <RM> is mirror rotated.
2. Data not inside of the print area will not be mirror rotated.
3. For item not inclusive of print data, if this command is specified, it will become command error.
4. This command cannot be applied together with command (sequential number specification <F>, within label copy <WD>, calendar
print specification <WA> etc) that inclusives of re-editing of print data. And also the graphic registration specification <GI>, format
1. registration specification <YS>, data registration commands.
5. Multiple specification cannot be conducted with less than 1 item under this command.
M-8400RVe CL608e/612e
M-84Pro-2/3/6 LC408e/412e
RM Parameter
<52> <4D> aaaa,bbbb
16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
M-5900RVe M-10e
ESC+RM
= valid range
= valid range
= valid range
= valid range
38
: refer to next page table
: refer to next page table
: 8~9999
: 8~9999