Esc+E Automatic Line Feed - SATO LC400e Series Programming Reference Manual

12.16 System
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

12.16 ESC+E Automatic Line Feed

Automatic Line Feed
ESC
HEX Code
<1B>
16
Default Value aaa=0
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify line pitch and new line
[Format]
<E>aaa
● Parameter
a {Line Pitch Width}
[Coding Example]
<A>
<E>10
<V>100<H>200<P>2<L>0304<XM>ABCDE+CR
FGHIJ+CR
<Q>2
<Z>
[Supplementary Explanation]
1.When CR(0DH)is specified, a line feed is given to only the specified pitch.
2.Rotate Specification <%> is valid.
3.Line pitch changes is valid from Automatic Line Feed Specification <E> among items.
4.Specify Automatic Line Feed Specification <E> before specifying the repeat printing of a line.
5.Auto line feed is performed by continuing CR(0DH)specification, however, the beginning print position of new line is determined by value of Print
Horizontal Position Specification <H> after pitch of Automatic Line Feed Specification <E> and Automatic Line Feed Specification<E>.
However, when multiple Print Horizontal Position Specification <H> is specified after this command, the position to return to CR(0DH)becomes the last
position of Print Horizontal Position Specification <H>.
M-8400RVe CL608e/612e
M-84Pro-2/3/6 LC408e/412e
E Parameter
<45> aaa
16
The set parameter is maintained
The set parameter becomes invalid
The set parameter becomes invalid
= valid range : 0~999 (dot)
M-5900RVe M-10e
ESC+E
223