Loading Labels And Tags - SATO M-84PRO Operation Manual

Operation Manual

LOADING LABELS AND TAGS

1. Open the Top Access Door by swinging it up
and to the left. Open the Side Access Door by
swinging it to the rear of the printer.
2. Open the Print Head Assembly by pushing the
Head Latch toward the rear of the printer. The
Print Head Assembly is spring-loaded and will
automatically open as soon as the Head Latch
is disengaged.
3. Loosen the Label Edge Guide and push it to
the outside of the printer to give the maximum
label width.
4. Remove the Label Roll Retainer
SATO M-84PRO
Section 2. Installation
Print Head
Label Hold Down
Sensor Assembly
Label Edge Guide
Top Access Door
Side Access
Door
Label Roll Retainer
Head Latch
Label
Guide
Page 2-3