Copy Image Area (Partial Copy) - SATO CL408 Programming Reference Manual

COPY IMAGE AREA (PARTIAL COPY)

FUNCTION
To copy an image from one location to another on the same label. This may be useful for
duplicating individual fields or entire sections of the label with only one command.
FORMAT
<ESC>WDHaaaaVbbbbXccccYdddd
Place anywhere within the data stream after specifying the location of the duplicate image.
EXAMPLE <ESC>A
<ESC>H0050<ESC>V0050<ESC>E010<ESC>XM
SATOSATOSATOSATOSATOSATOSATO
SATOSATOSATOSATOSATOSATOSATO
SATOSATOSATOSATOSATOSATOSATO
SATOSATOSATOSATOSATOSATOSATO
<ESC>H0180<ESC>V0250<ESC>WDH0130V0050X0400Y0200
<ESC>Q1
<ESC>Z
OUTPUT
(4-11)
NOTES
Use the Print Position (V and H) commands to locate the new area for the duplicate image.
Position of the new target area must not be inside the original image.
If you use the Rotate command; the V, H, X, and Y axis will be reversed.
If the reference area of the target image exceeds the print area, it will not be printed.
E/Pro Programming Reference
Unit 4: Standard Command Codes
aaaa = Horizontal position of the top left corner of the area
bbbb = Vertical position of the top left corner of the area
cccc = Horizontal length of the image area to be copied
dddd = Vertical length of the image area to be copied
4-19
PN: 9001096E