SATO LC400e Series Programming Reference Manual
  1. Manuals
  2. Brands
  3. SATO Manuals
  4. Printer
  5. LC400e Series
  6. Programming reference manual

SATO LC400e Series Programming Reference Manual

Hide thumbs Also See for LC400e Series:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual

Advertisement

Table of Contents
loading

Related Manuals for SATO LC400e Series

Summary of Contents for SATO LC400e Series

  • Page 2 Specifications and contents in this document are subject to change without notice. Trademarks SATO is a registered trademark of SATO Holdings Corporation and its subsidiaries in Japan, the U.S. and other countries. QR Code is a registered trademark of DENSO WAVE INCORPORATED.

  • Page 3: Table Of Contents

    Table of Contents 1. Outline ................................... 7 2. Motion Setting Default Value ............................. 7 3. Font Table ..................................9 4. View Point of Command Manual ..........................11 5. Control Command ..............................13 5.1 ESC+A Data Send Start ............................13 5.2 ESC+Z Data Send End ............................14 5.3 ESC+Q Print Number ............................
  • Page 4 7.24 ESC+RS Sheet Sending ............................ 47 7.25 ESC+WS Work Shift Information Print ......................48 7.26 ESC+RZ RFID Message Print Registration ...................... 49 8. Font Command ................................50 8.1 ESC+XU XU Font (Basic Size 5X9 dot) ......................50 8.2 ESC+XS XS Font (Basic Size 17 X 17 dot) ......................52 8.3 ESC+XM XM Font (Basic Size 24 X 24 dot) .......................
  • Page 5 9.11 ESC+BP Postnet ............................... 108 9.12 ESC+BS USPS Barcode ..........................110 9.13 ESC+EU Composite Symbol ........................... 112 9.14 ESC+BL UPC-A Barcode (Without HRI) ......................116 9.15 ESC+BL~ESC+d UPC-A Barcode (With HRI) ....................117 9.16 ESC+BM UPC-A Barcode (With HRI) ......................119 10.
  • Page 6 12.16 ESC+E Automatic Line Feed ......................... 223 12.17 ESC+LD User Download ..........................224 12.18 ESC+EX Memory Area Enlarge ........................225 12.19 ESC+KM Kanji Mincho Style .......................... 226 12.20 ESC+KG Kanji Gothic Style ........................... 227 12.21 ESC+TW Option Waiting Time ........................228 12.22 ESC+TK Forced Tear Off ..........................

  • Page 7: Outline

    1. Outline This is the Command Specification for LC400e Series and Overseas ‘e’ Series. This ‘e’ Series is a general name of printers of Scantro Enhance (CL408e/412e, CL608e/612e, M-8400RVe, M-84Pro, M-5900RVe), S Series (M-8485Se, M-8490Se, M-8460Se, M-8459Se), M-10e. In this specification, Dip Switch for setting purpose is shown as DSW.
  • Page 8 M-84Pro-6 Item Default Value Print Speed 3 inch/sec(75mm/sec) “range: 2, 3, 4, 5, 6” Print Darkness Range “range: A, B, C” Print Darkness “range: 1, 2, 3, 4, 5” Start Position Offset ‘0’ Font Switch Over Kanji Code Switch Over Proportional Pitch Specification Proportional Pitch M-8400Rve...

  • Page 9: Font Table

    $= (specify print) CG Font「CG Times」 Fixed / Proportional All Models CG Font「CG Triumvirate」 Fixed / Proportional All Models ※1 Except LC400e series. ※2 The Option Kanji PCB (MEM PCB with Kanji ROM, Main PCB with Kanji ROM) is required.
  • Page 10 Enlarge Font The installation font is enlargeable from 1~12 times. The internal bitmap is enlargeable from its standard size of 1~12 times. For example, if the standard size is enlarged to 3 times with the width 5dot X height 9dot, it becomes at width 15dot X height 27 dot.

  • Page 11: View Point Of Command Manual

    4. View Point of Command Manual ② ③ ④ ① 7.2 Modify CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e Enlargement ESC+L ⑥ Parameter ⑤ HEX Code <1B> <4C> aabb Default Value aa=01, bb=01 ⑦ When Power is Switched The set parameter.
  • Page 12 ② To identify Command Valid / Invalid for each model When the command is invalid, it will be shown as{ e.g.) following table shows when the command is valid only for M-10e CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e ③...

  • Page 13: Control Command

    5. Control Command 5.1 Control CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 5.1 ESC+A Data Send Start Data Send Start ESC+A Parameter HEX Code <1B> <41> Default Value The set command is not maintained Valid Range and When Power is Switched Off Terms of The set command becomes invalid Valid Range within Items...

  • Page 14: Esc+Z Data Send End

    5.2 Control CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 5.2 ESC+Z Data Send End Data Send End ESC+Z Parameter HEX Code <1B> <5A> Default Value The set command is not maintained Valid Range and When Power is Switched Off Terms of The set command becomes invalid Valid Range within Items...

  • Page 15: Esc+Q Print Number

    5.3 Control CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 5.3 ESC+Q Print Number Print Number ESC+Q Parameter HEX Code <1B> <51> aaaaaa Default Value aaaaaa=1 The set parameter is not maintained Valid Range and When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 16: Esc+Id Job Id Number

    5.4 Control CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 5.4 ESC+ID Job ID Number Job ID Number ESC+ID Parameter HEX Code <1B> <49> <44> Default Value aa=<20> The set parameter is not maintained Valid Range and When Power is Switched Off Terms of The set parameter is valid until the next specification is made Valid Range within Items...

  • Page 17: Esc+Wk Job Name

    Valid Range between Items [Function] To specify Job Name for status return [Format] <WK>aaaaaaaaaaaaaaaa ●Parameter {Job Name} ASCII Code 16 digits, shift JIS Kanji 8 digits [Coding Example] Job Name:SATO <A> <WK>SATO <V>200<H>100<P>0<$>B,100,100,6 <$=>SATOPRINTER <Q>2 <Z> [Supplementary Explanation] 1.If status 4 is used on interface protocol, the specified Job Name can be set at the telegraphic status.

  • Page 18: Esc+Rk Rfid Write

    5.6 Control CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 5.6 ESC+RK RFID Write RFID Write ESC+RK Parameter HEX Code <1B> <52> <4B> a(,b)(,c),Dmm,n~n Default Value b=0, c=0 The set parameter is not maintained Valid Range and When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 19 [Supplementary Explanation] 1.Valid only with Optional installed model of CL408e/412eRFID. 2.RFID Write Specification <RK> operates as printer’s print motion, the following motions of Continuous Motion, Cutter Motion, (Motion 1), Dispense Motion (Motion 1) and Tear Off Motion is applicable. However, if tear off motion is specified, information return becomes invalid even if it is writable to the tag.

  • Page 20: Print Position Command

    6. Print Position Command 6.1 Print Position CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 6.1 ESC+H Print Horizontal Position Print Horizontal Position ESC+H Parameter HEX Code <1B> <48> aaaa Default Value aaaa=1 The set parameter is not maintained Valid Range and When Power is Switched Off Terms of...

  • Page 21: Esc+V Print Vertical Position

    6.2 Print Position CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 6.2 ESC+V Print Vertical Position Print Vertical Position ESC+V Parameter HEX Code <1B> <56> aaaa Default Value aaaa=1 The set parameter is not maintained Valid Range and When Power is Switched Off Terms of The set parameter is valid until the next specification is made Valid Range within Items...

  • Page 22: Modification Command

    7. Modification Command 7.1 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.1 ESC+P Character Pitch Character Pitch ESC+P Parameter HEX Code <1B> <50> Default Value aa=2 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made Valid Range within Items...

  • Page 23: Esc+L Enlargement

    7.2 Modify CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.2 ESC+L Enlargement Enlargement ESC+L Parameter HEX Code <1B> <4C> aabb Default Value aa=01, bb=01 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made Valid Range within Items...

  • Page 24: Esc+Ps Proportional Pitch

    7.3 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.3 ESC+PS Proportional Pitch Proportional Pitch ESC+PS Parameter HEX Code <1B> <50> <53> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is valid until the next specification is made Valid Range within Items...

  • Page 25: Esc+Pr Release Proportional Pitch

    7.4 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.4 ESC+PR Release Proportional Pitch Release Proportional Pitch ESC+PR Parameter HEX Code <1B> <50> <52> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is valid until the next specification is made Valid Range within Items...

  • Page 26: Esc+% Rotate

    7.5 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.5 ESC+% Rotate Rotate ESC+% Parameter HEX Code <1B> <25> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is valid until the next specification is made Valid Range within Items Command The set parameter becomes default value at next item <A>...

  • Page 27: Esc+F Sequential Number

    7.6 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.6 ESC+F Sequential Number Sequential Number ESC+F Parameter HEX Code <1B> <46> aaaabcccc(,dd,ee,f) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 28: Esc+Fw Ruler And Frame Print

    7.7 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.7 ESC+FW Ruler and Frame Print Ruler and Frame Print ESC+FW Parameter HEX Code Ruler aabcccc <1B> <46> <57> Frame aabbVccccHdddd Default Value The set parameter is not maintained Valid Range &...

  • Page 29: Esc

    7.8 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.8 ESC+( Black/White Inversion Print Black/White Inversion Print ESC+( Parameter HEX Code <1B> <28> aaaa,bbbb Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 30: Esc+Kc Kanji Code

    7.9 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.9 ESC+KC Kanji Code Kanji Code ESC+KC Parameter HEX Code <1B> <4B> <43> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made Valid Range within Items...

  • Page 31: Esc+& Form Overlay Registration

    7.10 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.10 ESC+& Form Overlay Registration Form Overlay Registration ESC+& & Parameter HEX Code <1B> <26> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is valid until the next specification is made Valid Range within Items...

  • Page 32: Esc+/ Form Overlay Recall

    7.11 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.11 ESC+/ Form Overlay Recall Form Overlay Recall ESC+/ Parameter HEX Code <1B> <2F> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is valid until the next specification is made Valid Range within Items...

  • Page 33: Esc+0 Part Editing Function

    7.12 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.12 ESC+0 Part Editing Function Part Editing Function ESC+0 Parameter HEX Code <1B> <30> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command becomes invalid Valid Range within Items...

  • Page 34: Esc+Wd Copy Within Labels (Part Copy)

    7.13 Modificaiton CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.13 ESC+WD Copy within Labels (Part ESC+WD Copy within Labels (Part Copy) Copy) Parameter HEX Code <1B> <57> <44> VaaaaHbbbbYccccXdddd Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 35 [Valid Range] Valid Range (dot) Horizontal Start Point of Copy Vertical Start Point of Copy Source Model Source Vertical Dot Size of Copy Source Horizontal Dot Size of Copy Source LC408e CL408e 1～832 1～1424 M-8400RVe M-84Pro-2 LC412e CL412e 1～1248 1～2136 M-84Pro-3 CL608e 1～1216...

  • Page 36: Esc+J Journal Print

    7.14 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.14 ESC+J Journal Print Journal Print ESC+J Parameter HEX Code <1B> <4A> a~a+CR<0D> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 37: Esc+Rf Font / Logo Search Print

    7.15 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.15 ESC+RF Font / Logo Search Print ESC+RF Font / Logo Search Print Parameter HEX Code <1B> <52> <46> aabbbb, n~n Default Value aa=01, bbbb=1 The set parameter is not maintained Valid Range &...

  • Page 38: Esc+Rm Mirror Rotate

    7.16 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.16 ESC+RM Mirror Rotate ESC+RM Mirror Rotate Parameter HEX Code <1B> <52> <4D> aaaa,bbbb Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 39 [Valid Range] Valid Range (dot) Mirror Rotate Specification Start Mirror Rotate Specification Model Horizontal Position Start Vertical Position LC408e CL408e 1～832 1～1424 M-8400RVe M-84Pro-2 LC412e CL412e 1～1248 1～2136 M-84Pro-3 CL608e 1～1424 1～1216 M-8460Se CL612e 1～1984 1～2136 M-5900RVe 1～896 1～1424 M-8459Se M-10eDT/TT 1～3200 1～3600...

  • Page 40: Esc+_D Variable Data

    7.17 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.17 ESC+_D Variable Data Variable Data ESC＋_D Parameter HEX Code <1B> <5F> <44> ,aa,n～n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 41: Esc+_Q Label Print Number

    7.18 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.18 ESC+_Q Label Print Number Label Print Number ESC＋_Q Parameter HEX Code <1B> <5F> <51> ,aaaa（,b） Default Value aaaa＝0001、b＝0 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 42: Esc+Ri Label Size

    7.19 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.19 ESC+RI Label Size Label Size ESC＋RI Parameter HEX Code <1B> <52> <49> aaaa,bbbb,cc,dd,eeee,ffff,gg,hh Default Value The set parameter is not maintained When Power is Switched Off Valid Range & The set parameter becomes valid until the next specification is Valid Range within Items Terms of...

  • Page 43: Esc+Rw Sheet Unit Copy Number

    7.20 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.20 ESC+RW Sheet Unit Copy Number Sheet Unit Copy Number ESC＋RW Parameter HEX Code <1B> <52> <57> Default Value aa＝01 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...

  • Page 44: Esc+Rc Sheet Unit Cut Number

    7.21 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.21 ESC+RC Sheet Unit Cut Number Sheet Unit Cut Number ESC＋RC Parameter HEX Code <1B> <52> <43> Default Value aa＝01 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...

  • Page 45: Esc+Rt Print Order

    7.22 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.22 ESC+RT Print Order Print Order ESC＋RT Parameter HEX Code <1B> <52> <54> Default Value a＝0 The set parameter is not maintained When Power is Switched Off Valid Range & The set parameter becomes valid until the next specification is Valid Range within Items Terms of...

  • Page 46: Esc+Re Telegraphic Message End

    7.23 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.23 ESC+RE Telegraphic Message End Telegraphic Message End ESC＋RE Parameter HEX Code <1B> <52> <45> Default Value a＝0 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 47: Esc+Rs Sheet Sending

    7.24 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.24 ESC+RS Sheet Sending Sheet Sending ESC＋RS Parameter HEX Code <1B> <52> <53> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command becomes invalid Valid Range within Items...

  • Page 48: Esc+Ws Work Shift Information Print

    7.25 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.25 ESC+WS Work Shift Information Print Work Shift Information Print ESC＋WS Parameter HEX Code <1B> <57> <53> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 49: Esc+Rz Rfid Message Print Registration

    7.26 Modification CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 7.26 ESC+RZ RFID Message Print ESC+RZ RFID Message Print Registration Registration Parameter HEX Code <1B> <52> <5A> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 50: Font Command

    8. Font Command 8.1 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.1 ESC+XU XU Font (Basic Size 5X9 dot) XU Font ESC+XU (Basic Size 5 x 9 dot) Parameter HEX Code <1B> <58> <55> Default Value The set parameter is not maintained Valid Range &...
  • Page 51 XU Font Character Set Basic size 5 X 9 dot forms the following words The above print sample is the printing with head density 12 dot/mm, 3 times size of horizontal/vertical...

  • Page 52: Esc+Xs Xs Font (Basic Size 17 X 17 Dot)

    8.2 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.2 ESC+XS XS Font (Basic Size 17 X 17 XS Font ESC+XS dot) （Basic Size 17 x 17 dot） Parameter HEX Code <1B> <58> <53> Default Value The set parameter is not maintained Valid Range &...
  • Page 53 XS Font Character Set Basic size 17 X dot forms the following words The above print sample is with head density 12 dot/mm, 2 times size of vertical/horizontal...

  • Page 54: Esc+Xm Xm Font (Basic Size 24 X 24 Dot)

    8.3 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.3 ESC+XM XM Font (Basic Size 24 X 24 XM Font ESC+XM dot) （Basic Size 24 x 24 dot） Parameter HEX Code <1B> <58> <4D> Default Value The set parameter is not maintained Valid Range &...
  • Page 55 XM Font Character Set Basic side 24 X 24 dot forms the following words The above print sample with head density 12 dot/mm, 2 times size of vertical/horizontal...

  • Page 56: Esc+Xb Xb Font (Basic Size 48 X 48 Dot)

    8.4 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.4 ESC+XB XB Font (Basic Size 48 X 48 XB Font ESC+XB dot) （Basic Size 48 x 48 dot） Parameter HEX Code <1B> <58> <42> an~n Default Value The set parameter is not maintained Valid Range &...
  • Page 57 XB Font Character Set Words formed by basic size 48 X 48 dot The above print sample with the head density 12 dot/mm, 1 time size of vertical/horizontal...

  • Page 58: Esc+Xl Xl Font (Basic Size 48 X 48 Dot)

    8.5 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.5 ESC+XL XL Font (Basic Size 48 X 48 XL Font ESC+XL dot) （Basic Size 48 x 48 dot） Parameter HEX Code <1B> <58> <4C> an~n Default Code The set parameter is not maintained Valid Range &...
  • Page 59 XL Font Character Set Words formed by basic size 48 X 48 dot The above print sample with the head density 12 dot/mm, 1 time size of vertical/horizontal.

  • Page 60: Esc+Oa Ocr-A Font

    8.6 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.6 ESC+OA OCR-A Font OCR-A Font ESC+OA Parameter HEX Code <1B> <4F> <41> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 61 OCR-A Font Character Set OCR-A Font Specification The above print sample with the head density 12 dot/mm, 1 time of vertical / horizontal of 22 X 33 dot...

  • Page 62: Esc+Ob Ocr-B Font

    8.7 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.7 ESC+OB OCR-B Font OCR-B Font ESC+OB Parameter HEX Code <1B> <4F> <42> Default Code The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 63 OCR-B Font Character Set OCR-B Font Specification The above sample is the printing with head density 12 dot/mm, 1 time size of vertical/horizontal of 30 X 36 dot...

  • Page 64: Esc+$ Outline Font Shape

    Italic Font without White, with Shadow [Coding Example] Font Type Specification:A, Font Width Specification:100 dot, Font Height Specification:100 dot, Font Shape Specification:1 <A> <V>100<H>100<P>2 <$>A,100,100,1<$=>SATO <Q>2 <Z> [Supplementary Explanation] 1.The shape of Italic font is inclining at 15° within the font width specification.

  • Page 65: Esc+$= Outline Font Print

    Valid Range between Items [Function] To specify printing of outline font [Format] <$=>n~n ● Parameter {Print Data} Data [Coding Example] Print Data:SATO <A> <V>100<H>100<P>2 <$>A,100,100,1<$=>SATO <Q>2 <Z> [Supplementary Explanation] 1.Specify the Outline Font Shape Specification <$> before the Outline Font Print Specification <$=>.
  • Page 66 Outline Font Character Set Outline Font Specification The above sample is the printing with head density 12 dot/mm, standard font 50 X 50 dot.

  • Page 67: Esc+Rd Cg Font

    P02~P99(Point Specification) {Print Data} Data [Coding Example] <A> <V>100<H>100<P>2 <RD>A00,P10,P10,SATO <Q>2 <Z> [Supplementary Explanation] 1.Font size is set at “Dot Specification”, “Point Specification”. 2.Dot size is different based on printer model. (refer to the following table) 3.1 point is 0.35mm.
  • Page 68 CG Times Font Character Set CG Times Font Specification The above sample is the printing with the head density 12 dot/mm, 48 X 48 dot.
  • Page 69 CG Triumvirate Font Character Set CG Triumvirate Font Specification The above sample is the printing with head density 12 dot/mm, 48 X 48 dot.

  • Page 70: Esc+K1 16X16 Dot Horizontal Text Flow Kanji (Valid Specification Of Jis Or Shift Jis)

    8.11 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.11 ESC+K1 16X16 dot Horizontal Text 16 x 16 dot Horizontal Text Flow Kanji ESC+K1 Flow Kanji (Valid Specification of JIS or （Valid Specification of JIS or Shift JIS） Shift JIS) Parameter HEX Code...

  • Page 71: Esc+K2 24 X 24 Dot Horizontal Text Flow Kanji (Valid Specification Of Jis Or Shift Jis)

    8.12 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.12 ESC+K2 24 X 24 dot Horizontal Text 24 x 24 dot Horizontal Text Flow Kanji ESC+K2 Flow Kanji (Valid Specification of JIS or (Valid Specification of JIS or Shift JIS) Shift JIS) Parameter HEX Code...

  • Page 72: Esc+K8 16 X 16 Dot Horizontal Text With Mixture Of Half-Sized, Full-Sized Kanji

    E : with smoothing and highlighting function based on binary code {Data } Refer to Shift JIS Kanji Code Table [Coding Example] HEX Character Specification of shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times Data:SATO Corporation <A> <V>100<H>200<P>2<L>0305 <K8>H8A948EAE89EF8ED0BBC42D <Q>2...

  • Page 73: Esc+K9 24 X 24 Dot Horizontal Text With Mixture Of Half-Sized, Full-Sized Kanji

    E : with smoothing and highlighting function based on binary code {Data } Refer to Shift JIS Kanji Code Table [Coding Example] HEX Character Specification of shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times Data:SATO Corporation <A> <V>100<H>200<P>2<L>0305 <K9>H8A948EAE89EF8ED0BBC42D <Q>2...

  • Page 74: Esc+K1 16X16 Dot Vertical Text Flow Kanji (Valid Specification Of Jis Or Shift Jis)

    8.15 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.15 ESC+k1 16X16 dot Vertical Text Flow 16 x 16 dot Vertical Text Flow Kanji ESC+k1 Kanji (Valid Specification of JIS or Shift JIS) (Valid Specification of JIS or Shift JIS) Parameter HEX Code <1B>...

  • Page 75: Esc+K2 24 X 24 Dot Vertical Text Flow Kanji (Valid Specification Of Jis Or Shift Jis)

    8.16 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.16 ESC+k2 24 X 24 dot Vertical Text Flow 24 × 24 dot Vertical Text Flow Kanji ESC+k2 Kanji (Valid Specification of JIS or Shift JIS) (Valid Specification of JIS or Shift JIS) Parameter HEX Code <1B>...
  • Page 76 E : with smoothing and highlighting function based on binary code {Data } Refer to Shift JIS Kanji Code Table [Coding Example] HEX Character Specification of Shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times Data:SATO Corporation <A> <V>100<H>200<P>2<L>0305 <k8>H8A948EAE89EF8ED0BBC42D <Q>2...

  • Page 77: Jis)

    E : with smoothing and highlighting function based on binary code {Data } Refer to Shift JIS Kanji Code Table [Coding Example] HEX Character Specification of Shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times, Data:SATO Corporation <A> <V>100<H>200<P>2<L>0305 <k9>H8A948EAE89EF8ED0BBC42D <Q>2...

  • Page 78: Esc+T1 16 X 16 Dot External Word Registration

    8.19 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.19 ESC+T1 16 X 16 dot External Word ESC+T1 16 x 16 dot External Word Registration Registration Parameter HEX Code <1B> <54> <31> abbn~n Default Value The set parameter is not maintained Valid Range &...
  • Page 79 [Supplementary Explanation] 1.To register external word of width 16 X height 16 dot into the internal memory. 2.Code which is specified at Registration Font Code Address combines itself with the “Kanji Code Mode” that is set in the printer, and then specify address of either JIS Code or Shift JIS Code.

  • Page 80: Esc+T2 24 X 24 Dot External Word Register

    8.20 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.20 ESC+T2 24 X 24 dot External Word 24 × 24 dot External Word Register ESC+T2 Register Parameter HEX Code <1B> <54> <32> abbn~n Default Value The set parameter is not maintained Valid Range &...
  • Page 81 [Supplementary Explanation] 1. Register external word of width 24 X height 24 dot inside of internal memory 2. Code whish is specified at Registration Font Code Address combines itself with the “Kanji Code Mode” that is set in the printer, and then specify address of either JIS Code or Shift JIS Code.

  • Page 82: Esc+K1(K2) External Character Re-Call Horizontal Text Flow

    8.21 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.21 ESC+K1(K2) External Character Re-Call External Character Re-Call ESC+K1(K2) Horizontal Text Flow Horizontal Text Flow K1(K2) Parameter HEX Code <1B> <4B> <31> (<4B> <32> ab~b Default Value The set parameter is not maintained Valid Range &...

  • Page 83: Esc+K1(K2) External Character Re-Call Vertical Text Flow

    8.22 Font CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 8.22 ESC+k1(k2) External Character Re-Call External Character Re-Call ESC+k1(k2) Vertical Text Flow Vertical Text Flow k1(k2) Parameter HEX Code <1B> <6B> <31> (<6B> <32> ab~b Default Value The set parameter is not maintained Valid Range &...

  • Page 84: Barcode Specification Outline

    9. Barcode Specification Outline From the specification (B, D, BD) followed with ESC, barcode specification can change every type of bardcode printing and every barcode ratio, includes print out guide bar as well as explanation character. Content change based on specification, use it after understand the content of this page and the following page. Below shows the outline of each specification (B, D, BD) [Barcode Ratio Specification] Barcode Specification...
  • Page 85 (4)Explanation Character, Guide Bar Specification UPC-A, JAN/EAN8 / 13 digit barcode can specify the availability of Explanation Character and Guide Bar. Barcode Specification Barcode Specification <B> Specification <D> Specification <BD> Specification Parameter JAN/EAN-13 Explanation Character Explanation Character Explanation Character Guide Bar NIL Guide Bar YES Guide Bar YES JAN/EAN-8...
  • Page 86 (5)Formation of Check Digit The check digit of each barcode is shown as following table. [C/D Formation] Barcode Barcode Specification Input Digit Print Digit and Content Specification Parameter 13 digit (barcode input data + C/D) 12 digit C/D calculation is done automatically by modulus 10. JAN/EAN-13 13 digit (barcode input data.

  • Page 87: Esc+B Barcode (Ratio 1:3)

    9.1 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.1 ESC+B Barcode (Ratio 1:3) Barcode (Ratio 1:3) ESC+B Parameter HEX Code <1B> <42> abbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 88 [Coding Example 1] Barcode Type:CODE39, thin bar width:03, barcode height:120, print data:*1234AB* <A> <V>100<H>100<B>103120*1234AB* <Q>2 <Z> [Coding Example 2] Barcode Type:JAN-8, thin bar width:02, barcode height:080, print data:4912345 <A> <V>100<H>100<B>4020804912345 <Q>2 <Z> [Supplementary Explanation] 1.NW-7, CODE39, Industrial 2 of 5, Matrix 2 of 5 can specify barcode character pitch. For specification method, by specifying right before the Character Pitch Specification <P>, it will become barcode character pitch specification.

  • Page 89: Esc+D Barcode (Ratio 1 : 2)

    9.2 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.2 ESC+D Barcode (ratio 1 : 2) Barcode (ratio 1 : 2) ESC+D Parameter HEX Code <1B> <44> abbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 90 [Coding Example 2] Barcode Type : Interleaved 2 of 5, Thin Bar Width : 04, Barcode Height : 240, Print Data : 98002345678163 <A> <V>100<H>100<D>20424098002345678163 <Q>2 <Z> [Coding Example 3] Barcode Type : UPC-A, Thin Bar Width : 02, Barcode Height : 120, Print Data : 20123948573 <A>...

  • Page 91: Esc+D~Esc+D Barcode (Explanation Word Selection)

    9.3 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.3 ESC+D~ESC+d Barcode (Explanation Barcode ESC+D~ ESC+d Word Selection) (Explanation Word Selection) D ~ d Parameter HEX Code <1B> <44> Character Type abbcccn~n + <d>n~n 16 ~ Default Value The set parameter is not maintained Valid Range &...

  • Page 92: Esc+Bd Barcode (Ratio 2 : 5)

    9.4 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.4 ESC+BD Barcode (ratio 2 : 5) Barcode (ratio 2 : 5) ESC+BD Parameter HEX Code <1B> <42> <44> abbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 93 [Coding Example 2] Barcode Type:Interleaved 2 of 5, Thin Bar Width:04, Barcode Height:240, Print Data:98002345678163 <A> <V>100<H>100<BD>20424098002345678163 <Q>2 <Z> [Coding Example 3] Bacode Type:UPC-A, Thin Bar Width:02, Barcode Height:120, Print Data:20123948573 <A> <V>240<H>100<BD>H0212020123948573 <Q>2 <Z> [Supplementary Explanation] 1. NW-7, CODE39, Industrial 2 of 5, Matrix 2 of 5 is valid for Barcode Character Pitch Specification. For specification method, by specifying right before Character Pitch Specification <P>, it becomes Barcode Character Pitch Specification.

  • Page 94: Esc+Bt Barcode Ratio Registration

    9.5 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.5 ESC+BT Barcode Ratio Registration Barcode Ratio Registration ESC+BT Parameter HEX Code <1B> <42> <54> abbccddee Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 95: Esc+Bw Barcode Print From Ratio

    9.6 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.6 ESC+BW Barcode Print from Ratio ESC+BW Barcode Print Specification from Ratio Parameter HEX Code <1B> <42> <57> aabbbn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 96 NW-7 Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0...
  • Page 97 CODE39 Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0...

  • Page 98: Esc+Bi Ucc/Ean128

    9.7 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.7 ESC+BI UCC/EAN128 <for Standard UCC/EAN128 ESC+BI Carton ID> <for Standard Carton ID> Parameter HEX Code <1B> <42> <49> aabbbcn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 99 Interleaved 2 of 5 Matrix 2 of 5 Industrial 2 of 5 UPC-A, JAN/EAN-8 JAN/EAN-13, UPC-E UCC/EAN128 MSI Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1...

  • Page 100: Esc+Bc Code93 Barcode

    9.8 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.8 ESC+BC CODE93 Barcode CODE93 Barcode ESC+BC Parameter HEX Code <1B> <42> <43> aabbbccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 101 CODE93 Code Table b4 b3 b2 b1 SP 0 ｀ ” & ’ < ＼ > CODE93 can be specified within{00H~7FH}...

  • Page 102: Esc+Bg Code128 Barcode

    9.9 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.9 ESC+BG CODE128 Barcode CODE128 Barcode ESC+BG Parameter HEX Code <1B> <42> <47> aabbbn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 103 CODE128 Code Table Value Code A Code B Code C ” ” & & ’ ’ < < >(NOTE 4) >(NOTE 4) ＠ ＠...
  • Page 104 Value Code A Code B Code C ＼ ＼ ＾ ＾ ＿ ＿ >SP ‘ >SP >! >! >” >” ># ># >$ >$ >% >% >& >& >’ >’ >( >( >) >) >* >* >+ >+ >, >, >- >- >.
  • Page 105 Value Code A Code B Code C SHIFT >B SHIFT >B Code-C >C Code-C >C Code-B >D FNC4 >D Code-B >D FNC4 >E Code-A >E Code-A >E FNC1 >F FNC1 >F FNC1 >F START CODE A >G >H >I (NOTE) 1.START CODE must to be sent.

  • Page 106: Esc+Bf Bookland

    9.10 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.10 ESC+BF Bookland Bookland ESC+BF Parameter HEX Code <1B> <42> <46> aabbn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items Command...
  • Page 107 Bookland Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1...

  • Page 108: Esc+Bp Postnet

    9.11 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.11 ESC+BP Postnet Postnet ESC+BP Parameter HEX Code <1B> <42> <50> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items Command...
  • Page 109 Postnet Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1...

  • Page 110: Esc+Bs Usps Barcode

    9.12 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.12 ESC+BS USPS Barcode USPS Barcode ESC+BS Parameter HEX Code <1B> <42> <53> aabbbccccccdddddddddd(e~e) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 111 USPS Code table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1...

  • Page 112: Esc+Eu Composite Symbol

    9.13 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.13 ESC+EU Composite Symbol Composite Symbol ESC+EU Parameter HEX Code <1B> <42> <55> aaabbn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 113 [Format 2] <EU>aabbcccn~n ●Parameter a [Type of composite symbol] = 11 : GS1-128 Composite (CC-A/CC-B) 12 : GS1-128 Composite (CC-C) b [Narrow bar width] = 01 to 12 dots c [Barcode height] = 001 to 500 dots *Specify barcode height when narrow bar width is “01”. *When specifying narrow bar width “03”, Barcode height “100”, Barcode height become 300 dots.
  • Page 114 [Coding Example6] GS1 DataBar Expanded Composite(CC-A/CC-B) <A> <V>100<H>100 <EU>060522104912345678904 <Q>1 <Z> [Coding Example7] GS1 DataBar Expanded Stacked(CC-A/CC-B) <A> <V>100<H>100 <EU>060502104912345678904 <Q>1 <Z> [Coding Example8] UPC-A Composite (CC-A/CC-B) <A> <V>100<H>100 <EU>0704331234567890|991234-abcd <Q>1 <Z> [Coding Example9] UPC-E Composite (CC-A/CC-B) <A> <V>100<H>100 <EU>08041200000123|15021231 <Q>1 <Z>...
  • Page 115 [Supplementary Explanation] 1. Parameter varies depending on one-dimensional barcode type. Segment width can be specified only for DataBar Expanded Composite(CC-A/CC-B) (EU06). Barcode height can be specified only for GS1-128(UCC/EAN-128) (EU11, EU12). 2. If the value is not set to the data portion, composite symbol will not be printed. 3.

  • Page 116: Esc+Bl Upc-A Barcode (Without Hri)

    9.14 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.14 ESC+BL UPC-A Barcode (Without UPC-A Barcode (Without HRI) ESC+BL HRI) Parameter HEX Code <1B> <42> <4C> aaabbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...

  • Page 117: Esc+Bl~Esc+D Upc-A Barcode (With Hri)

    9.15 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e ESC+BL 9.15 ESC+BL~ESC+d UPC-A Barcode UPC-A Barcode (With HRI) (With HRI) ~ ESC+d BL~d Parameter HEX Code <1B> <42> <4C> aaabbcccn~n<d>n~n 16~character type Default Value The set parameter is not maintained Valid Range &...
  • Page 118 [Supplementary Explanation] 1. This command supports UPC-A only. When barcode type is specified other than “H”, command error occurs. 2. Recommended to specify [02] or [03] for the narrow bar width. 3. Check digit (12th digit) for HRI data should be set the calculation result of modulus 10. 4.

  • Page 119: Esc+Bm Upc-A Barcode (With Hri)

    9.16 Barcode CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 9.16 ESC+BM UPC-A Barcode (With HRI) UPC-A Barcode (With HRI) ESC+BM Parameter HEX Code <1B> <42> <4D> aaabbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...

  • Page 120: 10. 2-D Code Command

    10. 2-D Code Command 10.1 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.1 ESC+BQ QR Code QR Code ESC+BQ Parameter HEX Code <1B> <42> <51> Manual Setting abcc,(ddeeff,)g(hhhh)n Auto Setting abcc,(ddeeff,)n Default Value The set parameter is not maintained Valid Range &...
  • Page 121 QR Data Size Table (for Model 1) Error Error Numeric Alphanumeric Kanji Binary Numeric Alphanumeric Kanji Binary Version Version Correction Correction 21x21 61x61 25x25 65x65 1030 29x29 69x69 1167 33x33 73x73 37x37 41x41 45x45 49x49 53x53 57x57...
  • Page 122 QR Code (Numeric Mode) Code Table b4 b3 b2 b1...
  • Page 123 QR Code (Alphanumeric Mode) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0...
  • Page 124 QR Code (Binary Mode) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0 ” & ’ < ＼ > QR Code (binary mode) can be specified within{00H~7FH, A0H~DFH}...
  • Page 125 QR Code (Kanji Mode) Code Table Shift JIS 813F · ´ ¨ 。 ゛ ゜ ｀ ∥ 814F ＾ ￣ ＿ ヽ ヾ ゝ ゞ 〃 仝 々 〆 〇 ー 815F ｜ … ‥ ‘ ‘ “ ” ＼ 〔...
  • Page 126 Shift JIS 889E ア 亜 唖 娃 阿 哀 愛 挨 姶 逢 葵 茜 穐 悪 握 渥 88AE 旭 葦 芦 鯵 梓 圧 斡 扱 宛 姐 虻 飴 絢 綾 鮎 或 88BE 粟 袷 安 庵 按 暗 案 闇 鞍 杏 88BE イ...
  • Page 127 Shift JIS 8ADE キ 企 伎 危 喜 器 8AEE 基 奇 嬉 寄 岐 希 幾 忌 揮 机 旗 既 期 棋 棄 8B3F 機 帰 毅 気 汽 畿 祈 季 稀 紀 徽 規 記 貴 起 8B4F 軌...
  • Page 128 Shift JIS 8D90 コ 告 国 穀 酷 鵠 黒 獄 漉 腰 甑 忽 惚 骨 狛 込 8D9E 此 頃 今 困 坤 墾 婚 恨 懇 昏 昆 根 梱 混 痕 8DAE 紺 艮 魂 8DAE サ...
  • Page 129 Shift JIS 904F シ 唇 娠 寝 審 心 慎 振 新 晋 森 榛 浸 深 申 疹 真 905F 神 秦 紳 臣 芯 薪 親 診 身 辛 進 針 震 人 仁 刃 906F 塵 壬 尋 甚 尽 腎 訊 迅 陣 靭 906F ス...
  • Page 130 Shift JIS 929E チ 帖 帳 庁 弔 張 彫 徴 懲 挑 暢 朝 潮 牒 町 眺 92AE 聴 脹 腸 蝶 調 諜 超 跳 銚 長 頂 鳥 勅 捗 直 朕 92BE 沈 珍 賃 鎮 陳 92BE ツ...
  • Page 131 Shift JIS 94BE ハ 叛 帆 搬 斑 板 氾 汎 版 犯 班 畔 繁 般 藩 販 範 94CE 釆 煩 頒 飯 挽 晩 番 盤 磐 蕃 蛮 94CE ヒ 匪 卑 否 妃 庇 94DE 彼...
  • Page 132 Shift JIS 96DE モ 尤 戻 籾 貰 問 悶 紋 門 匁 96DE ヤ 也 冶 夜 爺 耶 野 弥 96EE 矢 厄 役 約 薬 訳 躍 靖 柳 薮 鑓 96EE ユ 愉 愈 油 癒 973F 諭...
  • Page 133 Shift JIS 989E 一 弌 丐 丕 989E 丨 个 丱 989E 丶 丶 丼 989E 丿 丿 乂 乖 乘 989E 乙 亂 989E 亅 亅 豫 亊 98AE 舒 98AE ニ 弍 于 亞 亟 98AE 亠 亠 亢 亰 亳 亶 98AE 人...
  • Page 134 Shift JIS 99AE 匸 匸 區 99BE 十 卆 卅 丗 卉 卍 凖 99BE ト 卞 99BE 卩 卩 卮 夘 卻 卷 99BE 厂 厂 厖 厠 厦 99CE 厥 厮 厰 99CE 厶 厶 參 簒 99CE 又...
  • Page 135 Shift JIS 9B6F 子 孑 孕 孚 孛 孥 孩 孰 孳 孵 學 斈 孺 9B6F 宀 宀 9B80 它 宦 宸 寃 寇 寉 寔 寐 寤 實 寢 寞 寥 寫 寰 寶 9B90 寳 9B90 寸 尅...
  • Page 136 Shift JIS 9C9E 心 悄 悛 悖 悗 悒 悧 悋 惡 悸 惠 惓 悴 忰 悽 惆 9CAE 悵 惘 慍 愕 愆 惶 惷 愀 惴 惺 愃 愡 惻 惱 愍 愎 9CBE 慇 愾 愨 愧 慊 愿 愼 愬 愴 愽 慂 慄 慳 慷 慘 慙 9CCE 慚...
  • Page 137 Shift JIS 9E80 木 梳 栫 桙 档 桷 桿 梟 梏 梭 梔 條 梛 梃 檮 梹 桴 9E90 梵 梠 梺 椏 梍 桾 椁 棊 椈 棘 椢 椦 棡 椌 棍 9E9E 棔 棧 棕 椶 椒 椄 棗 棣 椥 棹 棠 棯 椨 椪 椚 9EAE 椣...
  • Page 138 Shift JIS E080 火 烙 焉 烽 焜 焙 煥 煕 熈 煦 煢 煌 煖 煬 熏 燻 熄 E090 熕 熨 熬 燗 熹 熾 燒 燉 燔 燎 燠 燬 燧 燵 燼 E09E 燹 燿 爍 爐 爛 爨 E09E 爪...
  • Page 139 Shift JIS E1CE 目 睾 睹 瞎 瞋 瞑 瞠 瞞 瞰 瞶 瞹 瞿 瞼 瞽 瞻 矇 矍 E1DE 矗 矚 E1DE 矛 矜 E1DE 矢 矣 矮 E1DE 石 矼 砌 砒 礦 砠 礪 硅 碎 硴 碆 硼 E1EE 碚...
  • Page 140 Shift JIS E39E 网 网 罕 罔 罘 罟 罠 罨 罩 罧 罸 E3AE 羂 羆 羃 羈 羇 E3AE 羊 羌 羔 羞 羝 羚 羣 羯 羲 羹 羮 羶 E3BE 羸 譱 E3BE 羽 翅 翆 翊 翕 翔 翡 翦 翩 翳 翹 飜 E3BE 老...
  • Page 141 Shift JIS E55F 艸 蘋 藾 藺 蘆 蘢 蘚 蘰 蘿 E55F 虍 虍 乕 虔 號 虧 E55F 虫 虱 蚓 蚣 E56F 蚩 蚪 蚋 蚌 蚶 蚯 蛄 蛆 蚰 蛉 蠣 蚫 蛔 蛞 蛩 蛬 E580 蛟...
  • Page 142 Shift JIS E6CE 赤 赧 E6DE 赭 E6DE 走 赱 赳 趁 趙 E6DE 足 跂 趾 趺 跏 跚 跖 跌 跛 跋 跪 跫 E6EE 跟 跣 跼 踈 踉 跿 踝 踞 踐 踟 蹂 踵 踰 踴 蹊 E73F 蹇...
  • Page 143 Shift JIS E89E 阜 陝 陟 陦 陲 陬 隍 隘 隕 隗 險 隧 隱 隲 隰 隴 E8AE 隶 隶 隸 E8AE 隹 隹 雎 雋 雉 雍 襍 雜 霍 雕 E8AE 雨 雹 霄 霆 霈 霓 E8BE 霎...
  • Page 144 Shift JIS E9AE 魚 魴 鮓 鮃 鮑 鮖 鮗 鮟 鮠 鮨 E9BE 鮴 鯀 鯊 鮹 鯆 鯏 鯑 鯒 鯣 鯢 鯤 鯔 鯡 鰺 鯲 鯱 E9CE 鯰 鰕 鰔 鰉 鰓 鰌 鰆 鰈 鰒 鰊 鰄 鰮 鰛 鰥 鰤 鰡 E9DE 鰰...

  • Page 145: Esc+Bv Maxi Code

    10.2 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.2 ESC+BV MAXI Code MAXI Code ESC+BV Parameter HEX Code <1B> <42> <56> a,b,c,ddddddddd,eee,fff,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 146 MAXI Code Code Table b8 0 b7 0 b6 0 b5 0 B4 b3 b2 b1 SP 0 @ P ｀ p ” & ’ < L ＼ > MAXI Code is specified from{01H~FFH}...

  • Page 147: Esc+Bk Pdf417

    10.3 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.3 ESC+BK PDF417 PDF417 ESC+BK Parameter HEX Code <1B> <42> <4B> aabbcddeeffffg~g(,h) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 148 * The symbol size of micro PDF417 is fixed at 34 type according to the following table. {Symbol size and data number of micro PDF417} Symbol Size Maximum Value of Data Digit Number cols(d) rows(e) Alphabet only(A~Z) Numeric only * The mixture of alphabet (capital letters, small letters), numeric and control code will be different based on the character number combination.
  • Page 149 PDF417 (includes micro PDF417) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0 ｀ ” & ’ < ＼ > PDF417 (includes micro PDF417)can be specified from{00H~FFH}...

  • Page 150: Esc+Bx Data Matrix

    10.4 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.4 ESC+BX Data Matrix Data Matrix ESC+BX Parameter HEX Code <1B> <42> <58> aabbccddeeefffghh Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 151: Esc+Dc Data Matrix Data

    10.5 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.5 ESC+DC Data Matrix Data Data Matrix ESC+DC Data Specification Parameter HEX Code <1B> <44> <43> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 152: Esc+Fx Data Matrix Sequential Number

    10.6 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.6 ESC+FX Data Matrix Sequential Data Matrix ESC+FX Number Sequential Number Specification Parameter HEX Code <1B> <46> <58> aaabcccdddeee Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 153 Data Matrix Code Table b8 0 b7 0 b6 0 b5 0 B4 b3 b2 b1 SP 0 @ P ｀ ” & ’ < ＼ > Data Matrix can be specified from{00H~FFH} Specify{7EH, 00H}if 00H is specified Specify{7EH, 7EH}if 7EH is specified...

  • Page 154: Esc+2D10 Pdf417

    10.7 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.7 ESC+2D10 PDF417 PDF417 ESC+2D10 2D10 Parameter HEX Code <1B> <32> <44> <31> <30> ,aa,bb,c,dd,ee(,f) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...
  • Page 155 [Supplementary Explanation] 1. Base print position of PDF417 is specified by vertical print position<V> and horizontal print position<H> <V>100<H>200<2D10>***・・・・・・** 2. When d=e=00, aspect ratio will be at 1:2 based on the number of print data. 3. When parameter d and e doesn’t match number of data, print may not be performed properly. 4.

  • Page 156: Esc+2D12 Micro Pdf417

    10.8 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.8 ESC+2D12 Micro PDF417 Micro PDF417 ESC+2D12 2D12 Parameter HEX Code <1B> <32> <44> <31> <32> ,aa,bb,c,dd(,e) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 157 Note: Symbol size of Micro PDF417 has 34 types and shown in the table below. Micro PDF417 - symbol size and number of data Symbol size Maximum number of data Cols (c) Rows (d) Alphabet (A-Z) Numeric Binary mode * Way of mixing alphabets (Capital, lower case), numeric characters and control codes differs by combination of number of characters.
  • Page 158 PDF417 (includes micro PDF417) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0 ｀ ” & ’ < ＼ > PDF417 (includes micro PDF417) can be specified from[00H to FFH]...

  • Page 159: Esc+2D20 Maxi Code

    10.9 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.9 ESC+2D20 MAXI Code MAXI Code ESC+2D20 2D20 Parameter HEX Code <1B> <32> <44> <32> <30> ,a(,bbb,ccc,d~d) Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 160 MAXI Code Code Table b8 0 b7 0 b6 0 b5 0 B4 b3 b2 b1 SP 0 @ P ｀ p ” & ’ < L ＼ > MAXI Code is specified from[01H to FFH]...

  • Page 161: Esc+2D30 Qr Code (Model 2)

    10.10 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.10 ESC+2D30 QR Code (Model 2) QR Code (Model 2) ESC+2D30 2D30 Parameter HEX Code <1B> <32> <44> <33> <30> ,a,bb,c,d(,ee,ff,gg) Default Value The set parameter is not maintained Valid Range &...
  • Page 162 [Supplementary Explanation1] 1. When specifying Kanji in <DN>, specify size that is 2 X number of Kanji characters. 2. For <DN> in Automatic setup, when 80H to 9FH and E0H to FFH is specified as data, it is handed as Kanji mode, and cannot specify them as binary.
  • Page 163 QR Code data size list (Model 2) Version Error Numeric Alpha- Kanji Binary Version Error Numeric Alpha- Kanji Binary エラー エラー バージョン 数字 英数字 漢字 バイナリ バージョン 数字 英数字 漢字 バイナリ Correction Numeric Correction Numeric コレクション コレクション 21×21 61×61 25×25 65×65 1022 29×29...
  • Page 164 QR Code data size list (Model 2) Version Error Numeric Alpha- Kanji Binary Version Error Numeric Alpha- Kanji Binary エラー エラー バージョン 数字 英数字 漢字 バイナリ バージョン 数字 英数字 漢字 バイナリ Correction Numeric Correction Numeric コレクション コレクション 2232 1352 4417 2677 1132 1840...

  • Page 165: Esc+2D31 Qr Code (Model 1)

    10.11 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.11 ESC+2D31 QR Code (Model 1) QR Code (Model 1) ESC+2D31 2D31 Parameter HEX Code <1B> <32> <44> <33> <31> ,a,bb,c,d(,ee,ff,gg) Default Value The set parameter is not maintained Valid Range &...
  • Page 166 [Supplementary Explanation1] 1. When specifying Kanji in <DN>, specify size that is 2 X number of Kanji characters. 2. For <DN> in Automatic setup, when 80H to 9FH and E0H to FFH is specified as data, it is handed as Kanji mode, and cannot specify them as binary 3.
  • Page 167 QR Code data size list (Model 1) Error Alpha- Error Alpha- Version Kanji Binary Version Kanji Binary Numeric Numeric Correction Correction numeric numeric １ Ｌ ４ ０ ２ ４ １ ０ １ ７ １ ０ Ｌ ６ ９ ０ ４ １ ８ １...

  • Page 168: Esc+2D32 Micro Qr Code

    10.12 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.12 ESC+2D32 Micro QR Code Micro QR Code ESC+2D32 2D32 Parameter HEX Code <1B> <32> <44> <33> <32> ,a,bb,c Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 169 [Coding Example2] Error correction level: 7%, Size of one side of cell: 04 Mixed specification of Manual setup (Data setup mode) In Manual setup, you can proceed specifying data in specified input mode (Numeric, Alphanumeric, Kanji, Binary) in a row. <A>...
  • Page 170 QR Code (Numeric Mode) Code Table b4 b3 b2 b1...
  • Page 171 QR Code (Alphanumeric Mode) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0...
  • Page 172 QR Code (Binary Mode) Code Table b8 0 b7 0 b6 0 b5 0 b4 b3 b2 b1 SP 0 ” & ’ < ＼ > QR Code (binary mode) can be specified within [00H to 7FH, A0H to DFH]...
  • Page 173 QR Code (Kanji Mode) Code Table Shift JIS ´ ¨ 813F 。 ， ． ・ ； ？ ！ ゛ ゜ ｀ 814F ＾ ￣ ＿ ヽ ヾ ゝ ゞ 〃 仝 々 〆 〇 ー ‐ ∥ ｜ … ‥ ‘...
  • Page 174 Shift JIS 889E ア 亜 唖 娃 阿 哀 愛 挨 姶 逢 葵 茜 穐 悪 握 渥 88AE 旭 葦 芦 鯵 梓 圧 斡 扱 宛 姐 虻 飴 絢 綾 鮎 或 88BE 粟 袷 安 庵 按 暗 案 闇 鞍 杏 88BE イ...
  • Page 175 Shift JIS 8ADE キ 企 伎 危 喜 器 8AEE 基 奇 嬉 寄 岐 希 幾 忌 揮 机 旗 既 期 棋 棄 8B3F 機 帰 毅 気 汽 畿 祈 季 稀 紀 徽 規 記 貴 起 8B4F 軌...
  • Page 176 Shift JIS 8D90 コ 告 国 穀 酷 鵠 黒 獄 漉 腰 甑 忽 惚 骨 狛 込 8D9E 此 頃 今 困 坤 墾 婚 恨 懇 昏 昆 根 梱 混 痕 8DAE 紺 艮 魂 8DAE サ...
  • Page 177 Shift JIS 904F シ 唇 娠 寝 審 心 慎 振 新 晋 森 榛 浸 深 申 疹 真 905F 神 秦 紳 臣 芯 薪 親 診 身 辛 進 針 震 人 仁 刃 906F 塵 壬 尋 甚 尽 腎 訊 迅 陣 靭 906F ス...
  • Page 178 Shift JIS 929E チ 帖 帳 庁 弔 張 彫 徴 懲 挑 暢 朝 潮 牒 町 眺 92AE 聴 脹 腸 蝶 調 諜 超 跳 銚 長 頂 鳥 勅 捗 直 朕 92BE 沈 珍 賃 鎮 陳 92BE ツ...
  • Page 179 Shift JIS 94BE ハ 叛 帆 搬 斑 板 氾 汎 版 犯 班 畔 繁 般 藩 販 範 94CE 釆 煩 頒 飯 挽 晩 番 盤 磐 蕃 蛮 94CE ヒ 匪 卑 否 妃 庇 94DE 彼...
  • Page 180 Shift JIS 96DE モ 尤 戻 籾 貰 問 悶 紋 門 匁 96DE ヤ 也 冶 夜 爺 耶 野 弥 96EE 矢 厄 役 約 薬 訳 躍 靖 柳 薮 鑓 96EE ユ 愉 愈 油 癒 973F 諭...
  • Page 181 Shift JIS 989E 一 弌 丐 丕 989E 丨 个 丱 989E 丶 丶 丼 989E 丿 丿 乂 乖 乘 989E 乙 亂 989E 亅 亅 豫 亊 98AE 舒 98AE ニ 弍 于 亞 亟 98AE 亠 亠 亢 亰 亳 亶 98AE 人...
  • Page 182 Shift JIS 99AE 匸 匸 區 99BE 十 卆 卅 丗 卉 卍 凖 99BE ト 卞 99BE 卩 卩 卮 夘 卻 卷 99BE 厂 厂 厖 厠 厦 99CE 厥 厮 厰 99CE 厶 厶 參 簒 99CE 又...
  • Page 183 Shift JIS 9B6F 子 孑 孕 孚 孛 孥 孩 孰 孳 孵 學 斈 孺 9B6F 宀 宀 9B80 它 宦 宸 寃 寇 寉 寔 寐 寤 實 寢 寞 寥 寫 寰 寶 9B90 寳 9B90 寸 尅...
  • Page 184 Shift JIS 9C9E 心 悄 悛 悖 悗 悒 悧 悋 惡 悸 惠 惓 悴 忰 悽 惆 9CAE 悵 惘 慍 愕 愆 惶 惷 愀 惴 惺 愃 愡 惻 惱 愍 愎 9CBE 慇 愾 愨 愧 慊 愿 愼 愬 愴 愽 慂 慄 慳 慷 慘 慙 9CCE 慚...
  • Page 185 Shift JIS 9E80 木 梳 栫 桙 档 桷 桿 梟 梏 梭 梔 條 梛 梃 檮 梹 桴 9E90 梵 梠 梺 椏 梍 桾 椁 棊 椈 棘 椢 椦 棡 椌 棍 9E9E 棔 棧 棕 椶 椒 椄 棗 棣 椥 棹 棠 棯 椨 椪 椚 9EAE 椣...
  • Page 186 Shift JIS E080 烙 焉 烽 焜 焙 煥 煕 熈 煦 煢 煌 煖 煬 熏 燻 熄 E090 熕 熨 熬 燗 熹 熾 燒 燉 燔 燎 燠 燬 燧 燵 燼 E09E 燹 燿 爍 爐 爛 爨 E09E 爪...
  • Page 187 Shift JIS E1CE 目 睾 睹 瞎 瞋 瞑 瞠 瞞 瞰 瞶 瞹 瞿 瞼 瞽 瞻 矇 矍 E1DE 矗 矚 E1DE 矛 矜 E1DE 矢 矣 矮 E1DE 石 矼 砌 砒 礦 砠 礪 硅 碎 硴 碆 硼 E1EE 碚...
  • Page 188 Shift JIS E39E 网 网 罕 罔 罘 罟 罠 罨 罩 罧 罸 E3AE 羂 羆 羃 羈 羇 E3AE 羊 羌 羔 羞 羝 羚 羣 羯 羲 羹 羮 羶 E3BE 羸 譱 E3BE 羽 翅 翆 翊 翕 翔 翡 翦 翩 翳 翹 飜 E3BE 老...
  • Page 189 Shift JIS E55F 艸 蘋 藾 藺 蘆 蘢 蘚 蘰 蘿 E55F 虍 虍 乕 虔 號 虧 E55F 虫 虱 蚓 蚣 E56F 蚩 蚪 蚋 蚌 蚶 蚯 蛄 蛆 蚰 蛉 蠣 蚫 蛔 蛞 蛩 蛬 E580 蛟...
  • Page 190 Shift JIS E6CE 赤 赧 E6DE 赭 E6DE 走 赱 赳 趁 趙 E6DE 足 跂 趾 趺 跏 跚 跖 跌 跛 跋 跪 跫 E6EE 跟 跣 跼 踈 踉 跿 踝 踞 踐 踟 蹂 踵 踰 踴 蹊 E73F 蹇...
  • Page 191 Shift JIS E89E 阜 陝 陟 陦 陲 陬 隍 隘 隕 隗 險 隧 隱 隲 隰 隴 E8AE 隶 隶 隸 E8AE 隹 隹 雎 雋 雉 雍 襍 雜 霍 雕 E8AE 雨 雹 霄 霆 霈 霓 E8BE 霎...
  • Page 192 Shift JIS E9AE 魚 魴 鮓 鮃 鮑 鮖 鮗 鮟 鮠 鮨 E9BE 鮴 鯀 鯊 鮹 鯆 鯏 鯑 鯒 鯣 鯢 鯤 鯔 鯡 鰺 鯲 鯱 E9CE 鯰 鰕 鰔 鰉 鰓 鰌 鰆 鰈 鰒 鰊 鰄 鰮 鰛 鰥 鰤 鰡 E9DE 鰰...

  • Page 193: Esc+2D50 Datamatrix (Ecc200)

    10.13 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.13 ESC+2D50 DataMatrix (ECC200) DataMatrix (ECC200) ESC+2D50 2D50 Parameter HEX Code <1B> <32> <44> <35> <30> ,aa,bb,ccc,ddd Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 194 *Symbol size of DataMatrix (ECC200) is following 30 types. Symbol size and number of data of DataMatrix(ECC200) Symbol size Maximum data digits Number of cell in Number of Number of Numeric Alphanumeric Briary one line(c) cell line(d) block 1152 1392 1042 1632 1222...
  • Page 195 DataMatrix Code table B8 0 B7 0 B6 0 B5 0 B4 B3 B2 B1 SP 0 ｀ ！ ” & ’ ； K ［ ｛ < ， ￥ ｜ M ］ m ｝ > N ＾ ． O ＿ DataMatrix can specify from 00H to FFH.

  • Page 196: Esc+2D51 Gs1 Datamatrix

    10.14 2-D Code CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 10.14 ESC+2D51 GS1 DataMatrix GS1 DataMatrix ESC+2D51 2D51 Parameter HEX Code <1B> <32> <44> <35> <31> ,aa,bb,ccc,ddd Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...
  • Page 197 11. The number of data can be specified in teh data part depends on the data format. Available data number is as follows. (Number of cell is auto setting or the maximum cell number is specified): Data format Number of data Numeric 3116 Data format...
  • Page 198 GS1 DataMatrix Code table B8 0 B7 0 B6 0 B5 0 B4 B3 B2 B1 SP 0 @ P ｀ ！ ” & ’ ； K ［ ｛ < ， ￥ ｜ M ］ m ｝ > N ＾ ．...

  • Page 199: 11. Graphic Command

    11. Graphic Command 11.1 Graphic CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 11.1 ESC+G Graphic Print Graphic Print ESC+G Parameter HEX Code <1B> <47> abbbcccn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 200: Esc+Gm Bmp File Print

    11.2 Graphic CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 11.2 ESC+GM BMP File Print BMP File Print ESC+GM Parameter HEX Code <1B> <47> <4D> aaaaa,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 201: Esc+Gp Pcx File Print

    11.3 Graphic CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 11.3 ESC+GP PCX File Print PCX File Print ESC+GP Parameter HEX Code <1B> <47> <50> aaaaa,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 202: 12. System Command

    12. System Command 12.1 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.1 ESC+CS Print Speed Print Speed ESC+CS Parameter HEX Code <1B> <43> <53> Default Value Refer to the table below The set parameter is maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 203: Esc+#E Print Darkness

    12.2 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.2 ESC+#E Print Darkness Print Darkness ESC+#E Parameter HEX Code <1B> <23> <45> Default Value Refer to the table below The set parameter is maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is done.

  • Page 204: Esc+A1 Label Size

    12.3 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.3 ESC+A1 Label Size Label Size ESC+A1 Parameter HEX Code <1B> <41> <31> aaaabbbb Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is done.
  • Page 205 [Specified Range] Model Horizontal Label Size (dot) Vertical Label Size (dot) LC408e CL408e 1～1424 1～832 M-8400RVe M-84Pro-2 LC412e 1～2136 CL412e 1～1248 M-84Pro-3 CL608e 1～1424 1～1216 M-8460Se CL612e 1～1984 1～2136 M-5900RVe 1～1424 1～896 M-8459Se M-10eDT/TT 1～3200 1～3600 1～1424 M-8485Se 1～1024 M-8490Se 1～1344 1～2136 M-84Pro-6...

  • Page 206: Esc+A3 Correction Pitch

    12.4 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.4 ESC+A3 Correction Pitch Correction Pitch ESC+A3 Parameter HEX Code <1B> <41> <33> VabbbbHcdddd Default Value The set parameter is maintained. Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is done.
  • Page 207 [Specified Range] Model H Direction Correction (dot) V Direction Correction (dot) LC408e 1～1424 1～832 CL408e LC412e 1～1248 1～2136 CL412e 1～2136 M-84Pro-3 1～1344 CL608e 1～1216 1～1424 M-8460Se 1～2136 CL612e 1～1984 M-8400RVe M-84Pro-2 1～1424 1～896 M-5900RVe M-8459Se M-10eDT/TT 1～3200 1～3600 1～1424 M-8485Se 1～1024 M-8490Se 1～1344...

  • Page 208: Esc+Ax Print Area Expand

    12.5 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.5 ESC+AX Print Area Expand Print Area Expand ESC+AX Parameter HEX Code <1B> <41> <58> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 209: Esc+Ar Print Area Standard

    12.6 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.6 ESC+AR Print Area Standard Print Area Standard ESC+AR Parameter HEX Code <1B> <41> <52> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 210: Esc+Ep Print End Position

    12.7 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.7 ESC+EP Print End Position Print End Position ESC+EP Parameter HEX Code <1B> <45> <50> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 211: Esc+~(Null) Multiple Cut

    12.8 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.8 ESC+~(NULL) Multiple Cut Multiple Cut ESC+~(NULL) ~ (NULL) Parameter HEX Code <1B> <7E> (<00> aaaa Default Value aaaa=1 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 212: Esc+~A Cut Unit Number

    12.9 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.9 ESC+~A Cut Unit Number Cut Unit Number ESC+~A Parameter HEX Code <1B> <7E> <41> aaaa Default Value aaaa=1 The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 213: Esc+~B Feed Cut Motion

    12.10 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.10 ESC+~B Feed Cut Motion Feed Cut Motion ESC+~B Parameter HEX Code <1B> <7E> <42> Default Value The set command is not maintained Valid Range & When Power is Switched Off Terms of The set command is invalid Valid Range within Items...

  • Page 214: Esc+* Clear

    12.11 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.11 ESC+* Clear Clear ESC+* Parameter HEX Code <1B> <2A> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items Command The set parameter becomes invalid...

  • Page 215: Esc+@ Offline

    12.12 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.12 ESC+@ OffLine OffLine ESC+@ Parameter HEX Code <1B> <40> ,a~a Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items Command...

  • Page 216: Esc+C Re-Print

    12.13 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.13 ESC+C Re-print Re-print ESC+C Parameter HEX Code <1B> <43> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items Command The set parameter becomes invalid...

  • Page 217: Esc+Pg Printer Motion Register

    12.14 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.14 ESC+PG Printer Motion Register Printer Motion Register ESC+PG Parameter HEX Code <1B> <50> <47> abcdefghhijklmnooppqqrrstuvwxy Default Value Refer to next page table onwards The set parameter is maintained Valid Range &...
  • Page 218 LC408e, LC412e, CL408e,CL412e,M-8400RVe,CL608e,CL612e,M-5900RVe,M-8485Se,M-8490Se,M-8460Se,M-8459Se,M-84Pro-2,M-84Pro-3,M-84Pro-6』 『 Item Content Not in use Fixed Not in use Fixed Print Speed 2 inch/sec LC408e, LC412e, CL408e, CL412e 3 inch/sec Default Value ：02H（4 inch/sec） 4 inch/sec Range ：2, 3, 4, 5, 6 inch/sec 5 inch/sec M-8400RVe 6 inch/sec Default Value ：04H（6 inch/sec）...
  • Page 219 LC408e, LC412e, CL408e,CL412e,M-8400RVe,CL608e,CL612e,M-5900RVe,M-8485Se,M-8490Se,M-8460Se,M-8459Se,M-84Pro-2,M-84Pro-3,M-84Pro-6 『 』（Con’t） Item Content 0 Slash Invalid （Default Value：01H） Valid JIS Code Kanji Code （Default Value：00H） Shift JIS Code Not in use Fixed Default Feed Invalid （Default Value：00H） Valid Proportional Pitch Fixed Pitch （Default Value：01H） Proportional Pitch Vertical Label Size (dot) LC408e, CL408e ：「01H～590H」...

  • Page 220: Esc+Pc Printer Motion Register

    12.15 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.15 ESC+PC Printer Motion Register Printer Motion Register ESC+PC Parameter HEX Code <1B> <50> <43> 1)｢a, b, c, d, ···y, z｣, 2)｢aa, b｣ Default Value Refer to next page table onwards The set parameter is maintained Valid Range &...
  • Page 221 LC408e, LC412e, CL408e,CL412e,M-8400RVe,CL608e,CL612e,M-5900RVe,M-8485Se,M-8490Se,M-8460Se,M-8459Se,M-84Pro-2,M-84Pro-3,M-84Pro-6 『 』 Item No Item Content Not in use Fixed Not in use Fixed Print Speed 2 inch/sec LC408e, LC412e, CL408e, CL412e 3 inch/sec Default Value：2（4 inch/sec） 4 inch/sec Range ：2, 3, 4, 5, 6 inch/sec 5 inch/sec M-8400RVe 6 inch/sec Default Value：4（6 inch/sec）...
  • Page 222 LC408e, LC412e, CL408e,CL412e,M-8400RVe,CL608e,CL612e,M-5900RVe,M-8485Se,M-8490Se,M-8460Se,M-8459Se,M-84Pro-2,M-84Pro-3,M-84Pro-6 『 』(con’t) Item No Item Content Fixed Not in use 0 Slash Invalid （Default Value：1） Valid Kanji Code JIS Code （Default Value：0） Shift JIS Code Not in use Fixed Default Feed Invalid （Default Value：0） Valid Proportional Pitch Fixed Pitch （Default Value：1）...

  • Page 223: Esc+E Automatic Line Feed

    12.16 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.16 ESC+E Automatic Line Feed Automatic Line Feed ESC+E Parameter HEX Code <1B> <45> Default Value aaa=0 The set parameter is maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 224: Esc+Ld User Download

    12.17 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.17 ESC+LD User Download User Download ESC+LD Parameter HEX Code <1B> <4C> <44> , a, b, c, d, e, f, g, h, i, j Default Value Refer to the following table The set parameter is maintained Valid Range &...

  • Page 225: Esc+Ex Memory Area Enlarge

    12.18 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.18 ESC+EX Memory Area Enlarge Memory Area Enlarge ESC+EX Parameter HEX Code <1B> <45> <58> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 226: Esc+Km Kanji Mincho Style

    12.19 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.19 ESC+KM Kanji Mincho Style Kanji Mincho Style ESC+KM Parameter HEX Code <1B> <4B> <4D> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 227: Esc+Kg Kanji Gothic Style

    12.20 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.20 ESC+KG Kanji Gothic Style Kanji Gothic Style ESC+KG Parameter HEX Code <1B> <4B> <47> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 228: Esc+Tw Option Waiting Time

    12.21 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.21 ESC+TW Option Waiting Time Option Waiting Time ESC+TW Parameter HEX Code <1B> <54> <57> Default Value aaa = 005 When the power switch is The set parameter is maintained. Valid range and term of Valid range within items...

  • Page 229: Esc+Tk Forced Tear Off

    12.22 System CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 12.22 ESC+TK Forced Tear Off Forced Tear Off ESC+TK Parameter HEX Code <1B> <54> <4B> Default Value When the power switch is The set parameter is not maintained. Valid range and term of Valid range within items The set parameter becomes invalid.

  • Page 230: 13. Memory Card Command

    13. Memory Card Command 13.1 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.1 ESC+CC Card Slot Card Slot ESC+CC Parameter HEX Code <1B> <43> <43> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is done.

  • Page 231: Esc+Bjf Memory Card Default

    13.2 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.2 ESC+BJF Memory Card Default Memory Card Default ESC+BJF Parameter HEX Code <1B> <42> <4A> <45> aaaaaaaa Default Value When Power is Switched The set parameter is not maintained Valid Range &...

  • Page 232: Esc+Bjs Memory Card Status Print

    13.3 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.3 ESC+BJS Memory Card Status Print Memory Card Status Print ESC+BJS Parameter HEX Code <1B> <42> <4A> <53> Default Value When Power is Switched Off The set parameter is not maintained Valid Range &...

  • Page 233: Esc+&S Form Overlay Register

    13.4 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.4 ESC+&S Form Overlay Register Form Overlay Register ESC+&S &S Parameter HEX Code <1B> <26> <53> ,aa,bbbb,cccc Default Value The registered data becomes valid Valid Range & When Power is Switched Off Terms of The registered data is valid until the next specification is made.
  • Page 234 Normally it is used only as number registration, by specifying the size of Window’s vertical as well as horizontal direction, enables it to move by Print Vertical Position Specification <V> and Print Horizontal Position Specification <H> during re-call. If register area exceed the print area because of the moving during re-call, the exceeded portion will not be printed out.
  • Page 235 [Size Specification Range of Window Horizontal Direction] Model Valid Range (dot) Model Valid Range (dot) LC408e 1～832 LC412e 1～1248 CL408e 1～832 CL412e 1～1248 M-8400RVe 1～832 CL612e 1～1984 CL608e 1～1216 M-5900RVe 1～896 M-8490Se 1～1344 M-8485Se 1～1024 M-84Pro-3 1～1248 M-8460Se 1～1216 M-84Pro-6 1～2496 M-8459Se 1～896...

  • Page 236: Esc+&R Form Overlay Re-Call

    13.5 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.5 ESC+&R Form Overlay Re-Call Form Overlay Re-Call ESC+&R &R Parameter HEX Code <1B> <26> <52> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 237: Esc+Ys Format Register

    13.6 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.6 ESC+YS Format Register Format Register ESC+YS Parameter HEX Code <1B> <59> <53> ,aaa Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.
  • Page 238 [Point] 1.Details of Format Registration Enables command group to be registered into the memory card (option). Once it is registered, specification thereafter the same command group can be avoided. And printdata can be changed and printed out when performing format re-call. By doing this we call this command group registration function as Format Registration.
  • Page 239 Below shows command for invalid registration Category Command Command Name <Q> Print Number Specification Control <ID> JOB ID No Specification <WK> JOB Name Specification <&> Form Overlay Register Specification <F> Sequential Number Specification Modification <0> Part Editing Function Specification <RM> Mirror Rotate Specification Font <T1>...

  • Page 240: Esc+/N Field Register

    13.7 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.7 ESC+/N Field Register Field Register ESC+/N Parameter HEX Code <1B> <2F> <4E> ,aa,bb Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 241: Esc+Yr Format Re-Call

    13.8 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.8 ESC+YR Format Re-Call Format Re-Call ESC+YR Parameter HEX Code <1B> <59> <52> ,aaa Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 242: Esc+/D Field Print

    13.9 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.9 ESC+/D Field Print Field Print ESC+/D Parameter HEX Code <1B> <2F> <44> ,aa,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 243: Esc+Gi Graphic Register

    13.10 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.10 ESC+GI Graphic Register Graphic Register ESC+GI Parameter HEX Code <1B> <47> <49> abbbcccdddn~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 244: Esc+Gr Graphic Re-Call

    13.11 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.11 ESC+GR Graphic Re-Call Graphic Re-Call ESC+GR Parameter HEX Code <1B> <47> <52> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 245: Esc+Gt Bmp File Register

    13.12 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.12 ESC+GT BMP File Register BMP File Register ESC+GT Parameter HEX Code <1B> <47> <54> aaa,bbbbb,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 246: Esc+Gc Bmp File Re-Call

    13.13 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.13 ESC+GC BMP File Re-Call BMP File Re-Call ESC+GC Parameter HEX Code <1B> <47> <43> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 247: Esc+Pi Pcx File Register

    13.14 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.14 ESC+PI PCX File Register PCX File Register ESC+PI Parameter HEX Code <1B> <50> <49> aaa,bbbbb,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 248: Esc+Py Pcx File Re-Call

    13.15 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.15 ESC+PY PCX File Re-Call PCX File Re-Call ESC+PY Parameter HEX Code <1B> <50> <59> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

  • Page 249: Esc+* Clear (Memory Card)

    {Register No} valid range 000~999 (omittable) True Type Font 001~999 (omittable) True Type Font excluded (when register no is omitted, the entire registered data will be cleared) [Coding Example 1] clear 001 of SATO Graphic <A> <CC1> <*>G,001 <Z> [Coding Example 2] clear 002 of PCX File <A>...

  • Page 250: Esc+Bj, Esc+Bjd True Type Font Register

    13.17 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e ESC+BJ 13.17 ESC+BJ, ESC+BJD True Type Font True Type Font Register Register ESC+BJD Parameter HEX Code <1B> <42> <4A> <44> (a···ab··b Default Value The set parameter is not maintained Valid Range &...

  • Page 251: Esc+Bjt True Type Font Re-Call

    13.18 Memory Card CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 13.18 ESC+BJT True Type Font Re-Call True Type Font Re-Call ESC+BJT Parameter HEX Code <1B> <42> <4A> <54> ,aa,bb,cc,dd,ee,ffff,n~n Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid...

  • Page 252: 14. Calendar Command

    14. Calendar Command 14.1 Calendar CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 14.1 ESC+WT Calendar Setting ESC+WT Calendar Setting Parameter HEX Code <1B> <57> <54> aabbccddee Default Value The set parameter is maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 253: Esc+Wp Calendar Calculation

    14.2 Calendar CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 14.2 ESC+WP Calendar Calculation ESC+WP Calendar Calculation Parameter HEX Code <1B> <57> <50> abbb Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter is valid until the next specification is made.

  • Page 254: Esc+Wa Calendar Print

    14.3 Calendar CL408e/412e M-8400RVe CL608e/612e M-5900RVe M-10e Printer M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e 14.3 ESC+WA Calendar Print ESC+WA Calendar Print Parameter HEX Code <1B> <57> <41> Default Value The set parameter is not maintained Valid Range & When Power is Switched Off Terms of The set parameter becomes invalid Valid Range within Items...

This manual is also suitable for:

Cl4e seriesCl6e seriesM-5900rve seriesM-8485se seriesM-8490se seriesM84pro series ... Show all

Table of Contents