12. System Command; Esc+Cs Print Speed - SATO LC400e Series Programming Reference Manual

12. System Command

12.1 System
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

12.1 ESC+CS Print Speed

Print Speed
ESC
HEX Code
<1B>
16
Default Value Refer to the table below
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify the print speed
[Format]
<CS>aa
● Parameter
a {Print Speed}
[Coding Example]
<A>
<CS>3
<Z>
[Supplementary Explanation]
1. Print speed value that is set directly from command or printer LCD will be maintained.
[Point]
1.If value out of setting range is specified, it become command error but print speed will not change.
2.Print speed can be set at default value at printer default set operation.
[Parameter Default Value and Specified Range]
Model
LC408e/412e
CL408e/412e
M-84Pro-6
M-8400RVe
M-84Pro-2
M-84Pro-3
M-5900RVe
CL608e/612e
M-10e
M-8485Se
M-8490Se
M-8460Se
M-8459Se
M-8400RVe CL608e/612e
M-84Pro-2/3/6
CS
<43> <53>
16 16
The set parameter is maintained
The set parameter is valid until the next specification is made.
The set parameter is valid until the next specification is made.
= refer to the table below
Default Parameter Valid
Value Range
3 1,2,3,4,5
3 1,2,3,4,5
2 1,2,3,4,5
3 1,2,3,4,5
3 1,2,3,4,5
3 1,2,3,4
3 2,3,4,5,6
6 4,6,8
4 3,4,5
6 4,6,8,10,12
6 4,6,8
6 4,6,8
4 2,3,4,5
M-5900RVe M-10e
LC408e/412e
ESC+CS
Parameter
aa
Print Speed against Parameter
1 : 2 inch/sec
2 : 3 inch/sec
3 : 4 inch/sec (100mm/sec)
4 : 5 inch/sec (125mm/sec)
5 : 6 inch/sec (150mm/sec)
1 : 2 inch/sec (50mm/sec)
2 : 4 inch/sec (100mm/sec)
3 : 6 inch/sec (150mm/sec)
4 : 8 inch/sec (200mm/sec)
5 : 10 inch/sec (250mm/sec)
2 : 2 inch/sec (50mm/sec)
3 : 3 inch/sec
4 : 4 inch/sec (100mm/sec)
5 : 5 inch/sec (125mm/sec)
6 : 6 inch/sec (150mm/sec)
7 : 7 inch/sec (175mm/sec)
8 : 8 inch/sec (200mm/sec)
10 : 10 inch/sec (250mm/sec)
12 : 12 inch/sec (300mm/sec)
202
(50mm/sec)
(75mm/sec)
(75mm/sec)