SATO LC400e Series Programming Reference Manual page 155

[Supplementary Explanation]
1. Base print position of PDF417 is specified by vertical print position<V> and horizontal print position<H>
<V>100<H>200<2D10>***・・・・・・**
2. When d=e=00, aspect ratio will be at 1:2 based on the number of print data.
3. When parameter d and e doesn't match number of data, print may not be performed properly.
4. When specifying security level height, parameter d or e should have large number.
5. Recommended to specify more than 2 dots for 8 dots/mm and 12 dots/mm printhead printhead because the
minimum module width and minimum module height of QR code may not be read by the scanner.
[point]
1. Sequential number is not available.
2. Specifying print position by automatic line feed is not available.
3. Print 00HtoFFH is available.
4. Format registration is available.
5. Enlarging minimum module size improves print quality.
6. Increasing security level improves read rate.
7. Print height varies depending on the character such as numeric only, alphabet only or mixture of numeric and
alphabets.
200
100
155