Esc+Wk Job Name - SATO LC400e Series Programming Reference Manual

5.5 Control
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

5.5 ESC+WK Job Name

Job Name
ESC
HEX Code
<1B>
16
Default Value aaaaaaaaaaaaaaaa=<20>
When Power is Switched Off
Valid Range and
Valid Range within Items
Terms of
Command
Valid Range between Items
[Function]
To specify Job Name for status return
[Format]
<WK>aaaaaaaaaaaaaaaa
●Parameter
a {Job Name}
[Coding Example] Job Name:SATO
<A>
<WK>SATO
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<Q>2
<Z>
[Supplementary Explanation]
1.If status 4 is used on interface protocol, the specified Job Name can be set at the telegraphic status.
2.Confirm the status at every ouput of status request (ENQ)
3.Program it within items and use it while printing is performed by using Data Send Start Specification <A> ~ Data Send Complete
Specification <Z>.
4.Can be used by combining with Job ID No Specification <ID>.
[Point]
1． At the status return interface protocol , it is valid if status request (ENQ) is received during printing (QTY≠0, includes Offline,
error).
2． At the status return interface protocol, if status request (ENQ) is received not during printing (QTY=0, received data is not
available
when power is switched on), set the space (20H) at the status and then return it.
3． Within the Data Send Start Specification <A> ~ Data Send Complete Specification <Z>, the final specified value becomes valid
when Job Name Specification <WK> is used more than twice.
4． The details can be referred to the "Interface Specification".
M-8400RVe CL608e/612e
M-84Pro-2/3/6 LC408e/412e
WK Parameter
<57> <4B> aaaaaaaaaaaaaaaa
16 16
16
The set parameter is not maintained
The set parameter becomes valid until the next specification is
made
The set parameter becomes invalid
= ASCII Code 16 digits, shift JIS Kanji 8 digits
M-5900RVe M-10e
ESC+WK
17