Jis) - SATO LC400e Series Programming Reference Manual

8.18 Font
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se
8.18 ESC+k9 24 X 24 dot Vertical Text with
24 x 24 dot Vertical Text with Mixture of Half-sized, Full-sized
Mixture of Half-sized, Full-sized Kanji (Valid
(Valid Specification of Shift JIS)
Specification of Shift
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range & When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify the mixture of print specification of width 24 X height 24 dot vertical text kanji with width 12 X height 24 dot half-sized
character.
[Format]
<k9>an~n
● Parameter
a {Kanji Specification Mode}
n {Data }
[Coding Example] HEX Character Specification of Shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times,
Data:SATO Corporation
<A>
<V>100<H>200<P>2<L>0305
<k9>H8A948EAE89EF8ED0BBC42D
<Q>2
<Z>
[Supplementary Explanation]
1.HEX Character
2.Binary Code
3.Smoothing Function Valid Ratio
4.Highlight Fucntion Valid Ratio
[Point]
1.For the highlighting function, the horizontal width of characters increase if follow the enlargement specification.
2.If highlighting function is used, be aware as there might have smearing problem occurs based on characters.
3.The valid specification of 24 X 24 dot vertical text with half-sized, full-sized kanji specification <k9> is limited for Shift JIS Kanji Code only.
4.Half-sized specification (character code of 1 byte) is printed out at size of 12 X 24 dot.
5.Full-sized specification (character code of 2 byte) is printed out at size of 24 X 24 dot.
6.Half-sized character has no relation with Kanji Gothic Style Specification <KG>, it is printed out by Mincho Style.
7.This command can be used only when option Kanji ROM is installed.
[NOTE]
1. When characters with sonant mark/half sonant mark at the half-sized specification is choosen, characters and part of sonant mark/half
sonant mark turns out to be different printing.
Example: if{ﾊﾞｰ}is specified, it comes out with{ﾊ}{ﾞ}{-}.
[Valid Command]
Print Position
<V>
Modification
<P>
M-8400RVe CL608e/612e
M-84Pro-2/3/6
Kanji

JIS)

k9 Parameter
<6B> <39> an~n
16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
= H : HEX Character Specification
B : Binary Code Specification
I : with smoothing function based on HEX
C : with smoothing function based on binary code
J : with highlighting function base on HEX
D : with highlighting function based on binary code
K : with smoothing and highlighting function based on HEX
E : with smoothing and highlighting function based on binary code
= Refer to Shift JIS Kanji Code Table
= Kanji Code 4 byte ASCII/Kanji 1 character
= Kanji Code 2 byte/Kanji 1 character
= Horizontal, Vertical
= Horizontal, Vertical
<H>
<L> <%> <&>
M-5900RVe M-10e
LC408e/412e
ESC+k9
valid range : 3~12 times
valid range : 1~5 times
ﾊ
ﾞ
-
<WD>
</> <0>
77