SATO LC400e Series Programming Reference Manual page 19

[Supplementary Explanation]
1.Valid only with Optional installed model of CL408e/412eRFID.
2.RFID Write Specification <RK> operates as printer's print motion, the following motions of Continuous Motion, Cutter Motion, (Motion
1), Dispense Motion (Motion 1) and Tear Off Motion is applicable. However, if tear off motion is specified, information return
becomes invalid even if it is writable to the tag.
3. RFID Write Specification <RK> cannot be specified at multiple between Data Send Start Specification <A> ~ Data Send Complete
Specification <Z>. Use STX+<A> and <Z>+ETX as a pair. The motion is not stable when STX and ETX is omitted.
4.When RFID Tag Error Ignore is specified, print job will be re-started automatically when RFID Tag Error occur. After the re-start, the
data as same as the sent-data will be sent when RFID Tag Error occur, the quantity specified at Print Label Specification <Q> will
not be deducted.
When RFID Tag Error Ignore Specification is set at 2~9, the specified quantity of RFID Tag Error will be ignored. If specified
quantity of RFID Tag Error continue to appear, print job will be stopped with error. To stop auto printing temporarily when RFID tag
error occurs, press LINE key when RFID TAG ERROR is displaying on the LCD screen, set to Offline status, clear all of the
received data.
5.If specification of parameter b is omitted, RFID Tag Error Ignore Specification will not be performed.
6.Once specification of parameter c is omitted, write protector specification will not be executed. If specification of parameter b is
omitted, the specification of parameter c is not able to be performed.
7.If write protector is specified, data which is written to the Tag will be protected. Please be noted that once the Tag is protected, the
re-write of the Tag is not able to be executed. And if data re-write is performed by printer to the protected Tag data, RFID Tag Error
will appear.
8.Only TAG-IT can be applied on Write Protector Specification. If write protector is specified against I-CODE tag, command error will
appear.
9.Information of sequential and calendar cannot be written in RFID. It can be used with combination with Job ID Specification <ID>.
10. The RFID detail motion can be referred to "RFID Kit Option Specification".
19