Esc+#E Print Darkness - SATO LC400e Series Programming Reference Manual

12.2 System
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

12.2 ESC+#E Print Darkness

Print Darkness
ESC
HEX Code
<1B>
16
Default Value Refer to the table below
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify print darkness
[Format]
<#E>ab
● Parameter
a {Print Darkness Level Specification}
b {Print Darkness Specification}
[Coding Example]
<A>
<#E>3
<Z>
[Supplementary Explanation]
1. Print darkness value that is set directly from command or printer LCD will be maintained.
[Point]
1.If value out of setting range is specified, it become command error but print darkness will not change.
2.Print darkness can be set at default value by printer default set operation.
[Parameter{a}Default Value and Valid Range]
Model Default Value
LC408e/412e 3：Normal
CL408e/412e
M-8400RVe
M-10eDT/TT
M-5900RVe
M-8459Se
M-84Pro-2/3/6
M-8400RVe CL608e/612e
M-84Pro-2/3/6 LC408e/412e
#E Parameter
<23> <45> ab
16 16
The set parameter is maintained
The set parameter is valid until the next specification is done.
The set parameter is valid until the next specification is done.
=
=
Use{A}for normal condition
(Do not use{B~F})
*{B}is valid for use at LC408e, LC412e, CL412e, M-8400RVe, M-84Pro-6.
Specify{A~F}for print darkness specification based on applied label.
Parameter Valid
Range
1：Light
2：Medium Light
3：Normal
4：Medium Dark
5：Dark
M-5900RVe M-10e
ESC+#E
refer to the table below
A~F (omittable)
Model Default Value
CL608e/612e 2：Normal
M-8485Se/90
Se/60Se
203
Parameter Valid
Range
1：Light
2：Normal
3：Dark