Getting Started
Login to a Network Element
...................................................................................................................................................................................................................................
When to use
To configure the NE
Related information
No related information is available.
Before you begin
Before starting the ITM-CIT application and login in to a NE make sure that:
• the PC is connected to the network element (NE)
• the PC is rebooted at least once after installation.
Procedure
Follow these steps to login to a network element:
...................................................................................................................................................................................................
Start the ITM-CIT application.
1
Result:
...................................................................................................................................................................................................
Select
2
Result:
...................................................................................................................................................................................................
Select the correct
3
...................................................................................................................................................................................................
Select
4
The baudrate to be used is 115k.
AM1 (plus), TM1 do operate on a baudrate of 115k, the ADM16/1 family, and the
1643 AM is working with 114k.
...................................................................................................................................................................................................
Select
5
Result:
...................................................................................................................................................................................................
Select the user role from the capability field.
6
...................................................................................................................................................................................................................................
2-16
The main ITM-CIT window appears
File -> NE Login -> Login
The NE Login window appears.
COM port.
Edit
to set the correct baudrate.
Login
.
The Password Required window appears.
Alcatel-Lucent - Proprietary
in the main menu.
Usually this is COM1.
See notice on first page
365-312-807R7.2
Issue 4, May 2007