Traffic provisioning
Result:
...................................................................................................................................................................................................
Select the respective virtual switch and click
2
Result:
...................................................................................................................................................................................................
Select the WAN port in the
3
Result:
...................................................................................................................................................................................................
Select the
4
Reference:
Result:
role) window is displayed.
...................................................................................................................................................................................................
Select the required
5
...................................................................................................................................................................................................
Select the
6
...................................................................................................................................................................................................
7
If
the chosen Port Role is Customer Port,
the chosen Port Role is Network Port,
...................................................................................................................................................................................................
In the
8
Details
Result:
...................................................................................................................................................................................................
Click
9
Result:
...................................................................................................................................................................................................
Select enabled or disabled for
10
from the drop down list and click
...................................................................................................................................................................................................
Select the
11
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
The
Virtual Switches List
The
Virtual Switch List Information
The
Select Port Role
to be used for the WAN port.
Port Role
Refer to
"Flexible port role assignment" (p.
The
Customer/Network Port Information
PVID
and the required
Default User Priority
Virtual Switch Information
.
The
Network Port Information
, select Network Port in
Edit
The
Edit Network Port Information
. Either
QoS mode
Alcatel-Lucent - Proprietary
Provisioning a virtual switch in spanning tree mode
window is displayed.
Details
field and click on
Port Membership
screen is displayed.
Acceptable Frame Type
applicable for incoming packets..
Then
continue with
continue with
window, select Network Port and click
window appears.
Select Port Role
GVRP
and select enabled or disabled for
Ok
.
or
Default Profile
See notice on first page
.
window appears
Port Details
8-77).
(depending on the selected port
.
Step
11.
Step
8.
window and then click
window appears.
Flow Configuration
.
Port
.
Next
STP Protocol
are possible.
8-111